Spec Sheet - RGBCCT-ACCESSORIE-IL

Availability	In Stock
Condition	Brand New

Achieve clean, professional connections in your custom lighting projects with the 6-Pin Board-to-Board Connector for 12mm RGBCCT LED Strips. This compact and versatile connector is engineered to join two cut sections of an LED strip's PCB, creating a single, uninterrupted circuit. Unlike single-purpose connectors, this model features a unique dual-layout design that allows you to create either a perfectly straight extension or a clean 90-degree corner turn. It's the ideal solution for navigating the sharp corners of cabinetry, shelving, or architectural coves. This connector is specifically designed for 12mm wide RGBCCT color changing LED strip lights, providing a secure, solder-based connection for maximum long-term reliability in your lighting installations.

Key Features

Versatile Dual-Function Design

Uniquely designed to facilitate both straight, linear connections and sharp 90-degree corner turns with a single component.

Perfect Compatibility

Engineered specifically for 6-pin, 12mm wide RGBCCT LED strips, ensuring precise alignment and a secure fit.

Direct PCB Connection

Creates a rigid, stable link directly between the circuit boards of two strip sections for excellent electrical conductivity.

Reliable Soldered Bond

Requires soldering to establish a robust, permanent connection that won't loosen over time, ideal for professional installations.

Product Specifications

Parameter	Details
Product Model	RGBCCT-ACCESSORIE-IL
Product Type	Board-to-Board Connector
Pin Count	6-Pin
Compatible Strip Type	RGBCCT
Compatible Strip Width	12mm
Connection Method	Soldering Required
Length	50.8mm / 2.0 inches
Width	16.26mm / 0.64 inches
IP Rating	IP20 (Non-Waterproof)
Material	PCB

Application Scenarios

Custom Under-Cabinet Lighting Perfect for creating continuous runs of RGBCCT lighting under kitchen cabinets, seamlessly navigating around corners above sinks or appliances without dark spots.

Architectural Cove and Soffit Lighting Join multiple sections of RGBCCT LED strips to fit the precise dimensions of ceiling coves, soffits, or tray ceilings, ensuring clean turns and a professional finish.

Integrated Display and Shelf Lighting Build custom-fit lighting for retail displays, bookshelves, or trophy cases that require sharp, 90-degree angles to fully illuminate the contents from all sides.

Installation Guide for This Connector

Turn off all power to the LED strip before beginning.
Carefully cut your 12mm RGBCCT LED strip along the designated copper cut line.
Gently clean the six copper soldering pads on the ends of both strip sections to ensure a good connection.
Align the polarity markings (+, R, G, B, CW, WW) on the first LED strip with the corresponding pads on the connector. Solder each of the 6 points securely.
To create a straight connection, align the second strip with the pads on the opposite end. For a 90-degree corner, use the pads on the perpendicular side.
Solder the second strip section, again ensuring all six points are securely connected and there are no solder bridges between pads.
Briefly connect to power to test the connection and ensure all colors and channels function correctly before final mounting.

⚠ Precautions

This connector requires soldering and is recommended for users with soldering experience.
Always double-check that the pinout order on your LED strip matches the connector's pads before soldering.
This is a non-waterproof component and must be used in dry, indoor locations only.
Ensure a strong mechanical and electrical connection at all solder points to prevent flickering or failure.

What's in the Box

✓1x 6-Pin Board-to-Board Connector for 12mm RGBCCT LED Strip

Frequently Asked Questions

Q: Is this connector solderless?

A:No, this connector requires soldering to create a reliable and permanent connection. For solder-free options, please browse our range of solderless connectors.

Q: Can I use this for a 10mm 4-pin RGB strip?

A:No, this connector is specifically designed for 12mm wide, 6-pin RGBCCT LED strips. The pin spacing and width are not compatible with other strip types.

Q: How do I make a 90-degree corner turn with this connector?

A:The connector has two sets of solder pads arranged in an 'L' shape. Solder one strip to one end, and the second strip to the pads on the side to create a perfect 90-degree turn.

Q: Is this connector waterproof?

A:This connector is rated IP20 and is not waterproof. It should only be used in dry, indoor environments.

Q: What does 'board-to-board' mean?

A:It means the connector joins the printed circuit boards (PCBs) of two cut strip sections directly, creating a rigid and stable connection point without a flexible wire in between.

Q: Will this work with any brand of RGBCCT strip?

A:It is compatible with most 12mm 6-pin RGBCCT strips. However, you must always verify that the pinout order (+, R, G, B, CW, WW) on your strip matches the connector before soldering.

6 Pin Connector Board to Board Type For 12mm RGBCCT LED Strip