| Availability | In Stock |
|---|---|
| Condition | Brand New |
This is a dmx decoder for led lights, output 24 channels, each channel outputs 5 amps.
◆ Conforms to DMX512 interstate standard protocol.
◆ 8-bit/16-bit switching, high frequency/low frequency switching, full color drive control, DMX signal isolation, DMX output signal amplification function.
◆ No flashing on power, high frequency output, no jitter at low end
◆ 24 output channels, single channel maximum 5 amps drive output, the total output is not more than 120 amps.
◆ With the control system, you can achieve a rich change of effect.
◆ The DMX address of the lamp can be set freely.
◆ Good anti-interference, humanized terminal design.
SPEC Download 
DMX512 control signal connection:
DMX signal cable using super five twisted pair (network cable) and XLR head, DMX signal is divided into positive and negative ends, pay special attention to the polarity when crimping DMX signal cable plug.
DMX512 controller input and output of RJ45 network port: PIN1 signal positive, PIN2 signal negative, PIN7.8 signal ground.
XLR head: PIN1 signal ground, PIN2 signal negative, PIN3 signal positive.
At the end of the whole line, a DMX signal terminator should be connected (just turn down the DE8524 dip switch position 10).
Standards and Certifications
Rated voltage: DC12-24V
Drive output: 120A, 5A/CH
Working temperature: 0~70℃
Signal mode: DMX512/1990
Dimension: L250*W130*H24.2mm
Protection level: IP40
Adjustment range: 0-100%
Dimming grayscale level: 8bit/16bit
Control channel: 24 channels
Power: Max. 2880W
Weight: 920g