Spec Sheet - RGB-ACCESSORIE-COB-T

Select Colour:	White (Base)
Availability	In Stock
Condition	Brand New

Achieve a clean, professional, and solder-free connection for your 10mm wide COB RGB led strip with our specialized Terminal Plug Connector. Designed specifically for the unique contact points of Chip-on-Board technology, this 4 pin led strip connector bridges the gap between your light strip and your control system. One end securely clamps onto the COB strip, while the other provides a standard 4-pin male terminal plug, making it easy to connect to various RGB controllers or power distribution blocks. This terminal strip connector eliminates the hassle of soldering, allowing for quick modifications, repairs, and custom-length installations in minutes.

Key Features

COB-Specific Design

Engineered to make solid contact with the dense circuitry of 10mm 4-pin COB RGB strips, ensuring a reliable connection.

Solderless Installation

Features a simple clasp mechanism for a secure, tool-free electrical connection without any soldering.

Integrated Terminal Plug

The 100mm pigtail terminates in a standard 4-pin male plug, ready for direct connection to controllers or amplifiers.

Versatile Application

Ideal for creating custom-length leads, repairing damaged ends, or adapting a cut section of a COB strip for a new setup.

4 pin 10mm cob rgb led strip terminal plug connector — A 4-Pin 10mm solderless terminal plug connector for COB RGB LED strips.

Product Specifications

Parameter	Details
Model	RGB-ACCESSORIE-COB-T
Product Type	Strip to Terminal Plug Connector
Compatible Strip Type	COB RGB LED Strip
Compatible Strip Width	10mm
Pin Count	4-Pin
Connection Method	Solderless, Clamp-on
Material	Plastic, Metal
Color	White
Wire Length	100mm / 4 inches

Application Scenarios

Custom LED Lighting Projects Perfect for DIY enthusiasts and professionals creating custom-length lighting fixtures. Easily connect cut segments of COB RGB strips to a controller without the need for a soldering iron, ensuring a clean and modular setup.

Repairs and Modifications Quickly replace a damaged connector or add a terminal plug to a raw strip end. This connector saves time and effort, getting your lighting back up and running in moments.

Prototyping and Testing The reusable, solderless design makes this connector ideal for testing different lengths and configurations of COB strips during the design phase of a project, allowing for easy assembly and disassembly.

How to Use This Connector

Ensure your power supply is disconnected before starting.
Cut your 10mm COB RGB strip cleanly along a designated cut line.
Open the white clasp on the connector body.
Gently slide the end of the LED strip into the connector, ensuring it goes underneath the metal contact prongs.
Verify the strip's copper pads align correctly with the connector's pins and that the polarity markings (+, G, R, B) match the wire colors.
Press the clasp down firmly until it clicks shut, piercing the strip and securing the connection.
Connect the 4-pin terminal plug to the corresponding female port on your RGB controller or other device.
Reconnect power and test your lighting.

⚠ Precautions

This connector is designed exclusively for 10mm wide, 4-pin COB RGB LED strips. It is not compatible with standard SMD strips or strips of other widths or pin counts.
For a reliable connection, ensure the strip is cut straight and inserted fully into the connector.
This product is intended for indoor, dry-location use only as it is not waterproof.

What's in the Box

✓1 x 4-Pin 10mm COB RGB LED Strip Terminal Plug Connector

Frequently Asked Questions

Q: Can I use this for a 10mm SMD 5050 RGB strip?

A:No, this connector is specifically designed for the unique contact layout of COB LED strips. Using it with SMD strips may result in an unreliable or failed connection.

Q: Is this connector reusable?

A:Yes, you can carefully open and close the clasp multiple times, making it ideal for prototyping or reconfiguring your lighting setup.

Q: What's the difference between this and a strip-to-strip connector?

A:This model features a pre-attached 4-pin male terminal plug for direct connection to devices, while a strip-to-strip connector is used to join two separate pieces of LED tape together.

Q: Do I need any tools to install this?

A:No, this is a completely solderless solution. You only need scissors or a blade to cut the strip itself.

Q: Does the wire color match the RGB channels?

A:Typically, the wire colors correspond to the standard RGB wiring convention. However, always check the markings on your specific LED strip to confirm polarity before closing the clasp.

Q: Is this connector waterproof?

A:No, this is a non-waterproof connector and should only be used in dry, indoor environments.

4-Pin 10mm COB RGB LED Strip Terminal Plug Connector