| Select Power: | 0.3W/pcs (Base), 3W/pcs |
|---|---|
| Availability | In Stock |
| Condition | Brand New |
365nm UV Blacklight LEDs for Ink printing curing, electronic adhesive curing, and cable cross-linking curing. 365nm belongs to ultraviolet wavelengths, also known as UV A light or blacklight. It's also often seen in UV light strips and UV floodlights.
UV A Light Applications - Guide To Know LED UV Light Strip And UV Light Fixtures
Curing resin, epoxy, adhesive, glue
3D Printing
Endoscopy
Horticulture
Machine Vision
Maskless Lithography
Scientific Instrumentation
Banknote Counterfeiting
Standards and Certifications
| Product Type: | 365nm UV LED |
| LED Chip: | SMD 3535 San'an Chip |
| Chip Size: | 20*20mil |
| Bracket Material: | Ceramics |
| Power: | 0.3W/pcs, 3W/pcs |
| Forward Voltage: | 3.4-3.6V |
| Po: | 100-120 mW |
| Wavelength: | 365-370nm |
| Rated Current: | 80mA |
| Beam Angle: | 120° |
| Luminous Efficiency: | 90lm/W |
| Color Tolerance: | 5 SDCM |
| Thermal Resistance: | ≤5 °/W |
| Maximum Allowable Junction Temperature: | 260° |
| 1000 Hours Conventional Aging: | 90% |
| 6000 Hours Conventional Aging: | 93% |
| LM-80 Test: | Yes |
UV LEDs Precautions:
1. This device should not be used in any fluid such as water, oil, or organic solvent. If cleaning is needed, please use isopropyl alcohol for cleaning.
2. When the UV LED work, the operating current should be determined according to the maximum ambient temperature.
3. UV LED storage environment must be clean, if UV LEDs need to be stored for 3 months or longer after delivery, please use nitrogen cabinet for storage.
4. UV LEDs need to be used within seven days after opening the moisture-proof package, repack the unused product with the moisture-proof package, fold to seal the opening, and then store in a dry place.
5. LEDs are sensitive to static electricity and surges. When handling UV LEDs, it is recommended to use anti-static wrist straps or anti-static gloves.
6. When soldering LEDs by hand, the solder head must be grounded. If an overvoltage is applied to the UV LED that exceeds the absolute maximum rating, it will cause damage. Damaged LEDs will show some unusual characteristics, such as a significant increase in leakage, reduced turn-on voltage, and LEDs that do not light up at low currents.
7. Warm tips: Ultraviolet light hurts eyes, do not stare at the UV light source, and do not use the UV light source to irradiate the eyes of others!