| Select Length: | 16.4ft (5 meters) (Base), 32.8ft (10meter) Roll |
|---|---|
| Select PCB Width: | 10mm (0.39in) (Base) |
| Select Waterproof Rating: | Non-Waterproof IP20 - Adhesive Back (Base), Outdoor Silicone Tube IP67 - With Brackets, Underwater IP68 - Adhesive Back |
| Availability | In Stock |
| Condition | Brand New |
Newest addressable COB led strip with CCT color temperature running water effects, achieving various dynamic effects of white light.
Compared with SMD LED running water strip lights, the chip on board led strip has better light effect, no spot light, with dotless linear continuous light. You don't need to equipe additional accessories to eliminate the "dots".
To perfectly use the addressable cob led light strip, please add a WS2811 dual white controller and a 24V power supply (min 72W) to your cart. 3-pin Board to wire type cob led connector and board to board jumping type cob led stirp conenctor are available.
There is no voltage drop when powering a 10m this 24V cob led strip light from one end, so feel free to apply it in your private or commercial projects.
Standards and Certifications
| LED Strip Type: |
Addressable CCT COB LED Strip (COB led strip specification  ) |
| IC Chip: | WS2811 IC |
| Input Voltage: | DC24V |
| FPCB: | 2OZ Copper |
| LED Chip: | Gold wire copper bracket |
| Power: | 12W/m |
| Working Temperature: | -20℃~+45℃ |
| Storage Temperature: | -20℃~+60℃ |
| LED Color Temperature: | CCT Color Temperature Addressable (2700K to 6500K) |
| PCB Width: | 10mm |
| LED Quantity: | 574 Chips/m |
| Waterproof Rating: | Non-waterproof IP20 / Outdoor Waterproof IP67 |
| Cut Length: | 83.3mm |
| Lumen: | 2-3 lm/chip |
| Color Rendering Index: | Ra>90 |
| Beam Angle: | 180° |
| Strip Length: | 5m/16.4ft, 10m/33ft |
How to connect WS2811 addressable COB led strip?
3-pin single signal running water led strip wiring diagram:
