Spec Sheet - RGBCCT-ACCESSORIE-SW

Availability	In Stock
Condition	Brand New

Create clean, reliable connections for your custom lighting projects with the SuperLightingLED 6-Pin Strip-to-Wire Connector. Specifically engineered for 12mm wide RGBCCT (also known as RGBWW or RGB+Tunable White) LED strips, this connector eliminates the need for soldering, making installations faster and easier. Its primary function is to bridge a cut section of an LED strip to a 6-conductor wire, allowing you to seamlessly connect it to a power supply or an RGBCCT controller. The compact design and secure clasp mechanism provide a durable link, ensuring stable performance for intricate lighting layouts in residential or commercial settings. This simple accessory is essential for anyone looking to create professional, custom-length runs of advanced multi-color and tunable white lighting.

Key Features

Solderless Clamp Design

Features a simple snap-down clasp that creates a secure connection without any soldering, ideal for quick installations and modifications.

Precise Compatibility

Exclusively designed to fit 12mm wide, 6-pin RGBCCT (RGB+CCT) LED light strips, ensuring perfect alignment and electrical contact.

Strip-to-Wire Functionality

Effortlessly connects the end of an LED strip to loose wire leads, perfect for bridging gaps or linking strips to a power source.

Secure Connection

The firm clasp holds the strip tightly against high-conductivity copper contacts, preventing flickering and ensuring a stable, reliable connection.

Ready to Use

Comes with a 120mm (4.7-inch) color-coded 6-conductor wire pigtail, saving you time on preparation and wiring.

Technical Highlights

Transparent housing allows for visual confirmation of proper strip alignment before closing.
Sharp copper pins pierce the strip's PCB for a robust and reliable connection.
Durable plastic construction provides insulation and mechanical protection for the connection point.

Product Specifications

Parameter	Details
Product Name	6 Pin LED Strip to Wire Connector For 12mm RGBCCT Light Strips
Model	RGBCCT-ACCESSORIE-SW
Connector Type	Strip to Wire
Pin Count	6-Pin
Compatible Strip Width	12mm
Compatible Strip Type	RGBCCT (RGBWW, RGB+CCT)
Installation Method	Solderless, Snap-down Clasp
Attached Wire Length	Approx. 120mm / 4.7 inches
Housing Material	Plastic
Contact Material	Copper
IP Rating	IP20 (Non-Waterproof)

Application Scenarios

Custom Under-Cabinet and Task Lighting Perfect for creating custom-length power leads for RGBCCT LED strips installed under kitchen cabinets, in workshops, or display cases. This connector allows you to run wires discreetly from the end of a strip back to a hidden controller.

Architectural Cove and Accent Lighting When installing long, complex runs of cove lighting, you often need to connect multiple cut segments. Use this strip-to-wire connector to easily power each segment from a central power distribution point without soldering on-site.

DIY Lighting Projects and Repairs An essential component for any DIY enthusiast. Whether you're building a custom light fixture or repairing a damaged connection on an existing setup, this connector provides a quick and reliable fix for 12mm 6-pin strips.

How to Use This 6-Pin Strip-to-Wire Connector

First, ensure all power is disconnected from your lighting system for safety.
Using scissors, make a clean cut along the designated copper cut line on your 12mm RGBCCT LED strip.
Open the hinged white clasp on the connector body.
Carefully slide the cut end of the LED strip into the connector, ensuring it goes underneath the metal contact pins. Align the strip's copper pads with the pins.
Firmly press the clasp down until it snaps shut, securing the strip in place.
Connect the six color-coded wire leads to the appropriate terminals on your RGBCCT controller or power supply.
Once all connections are secure, restore power to the system and test your lights.

⚠ Precautions

This connector is designed exclusively for 12mm wide, 6-pin RGBCCT LED strips. Do not attempt to use with other widths or pin configurations.
Double-check that the copper pads on the strip are correctly aligned with the connector's pins before closing the clasp to ensure a proper connection.
This is a non-waterproof (IP20) connector intended for indoor, dry locations only.
Avoid putting excessive strain on the wires after connection, as this can damage the solder pads on the LED strip.

What's in the Box

✓1 x 6 Pin LED Strip to Wire Connector (Model: RGBCCT-ACCESSORIE-SW)

Frequently Asked Questions

Q: Will this connector work with my 4-pin RGB or 5-pin RGBW strip?

A:No, this connector is specifically designed for 6-pin, 12mm wide RGBCCT (RGB+CCT) LED strips. It is not compatible with strips that have a different pin count or width.

Q: Is soldering required for this connector?

A:No, this is a completely solderless connector. It uses a secure snap-down clasp mechanism to establish an electrical connection.

Q: What is the main purpose of a strip-to-wire connector?

A:A strip-to-wire connector is used to add a wire lead to the end of a cut LED strip, allowing you to easily connect it to a power supply, controller, or extend the wiring to another location.

Q: How can I ensure a solid connection?

A:Ensure your strip is cut cleanly on the designated line and inserted all the way into the connector so that the copper pads are directly under the contact pins before closing the clasp.

Q: Can I use this connector for outdoor lighting?

A:No, this connector has an IP20 rating and is not waterproof. It is intended for use in dry, indoor environments only.

Q: What is the length of the wire included with the connector?

A:The connector includes an attached wire pigtail that is approximately 120mm (4.7 inches) long.

Q: What's the difference between RGBCCT and RGBWW?

A:They are generally the same type of 6-pin strip, offering RGB colors plus a range of tunable white light from warm to cool. This connector is compatible with both.

6 Pin LED Strip to Wire Connector For 12mm RGBCCT Light Strips