| Select Kit: | LED Strips (Base), LED Strips + Controller + Power Supply, LED Strips + Controller |
|---|---|
| Select Length: | 16.4ft (5 meters) (Base) |
| Select Waterproof Rating: | Non-Waterproof IP20 - Adhesive Back (Base), Underwater IP68 - Adhesive Back, Outdoor Silicone Tube IP67 - Adhesive Back |
| Availability | In Stock |
| Condition | Brand New |
Our 5V RGB COB led strip is a flexible and affordable solution to light up your room, with high density 576 chips per meter (175 per foot) and dotless color changing light. COB RGB led strips are perfect for your home, under cabinet, living room, bedroom, gaming room, and anywhere else they can be placed. They have everything you need to make a beautiful and decorative atmosphere in your house. The narrow 8mm strip width makes it easy to be hidden.
If you are looking for a more economical and practical option for low-voltage DC5V color changing lights, these chip-on-board RGB strips will fit the bill. They can be easily cut down with scissors and work perfectly in any area where you want some extra ambient lighting.
Normally, 5V led strip lights have a large voltage drop, but this color-changing RGB strip does not. With power input at one end to run 5m/16.4ft length, it still has consistent color and brightness. Use this COB RGB led strip light to set the mood in your room now. This will add a nice glow to your space. It can be attached to any surface with double-sided tape or you can clip them on using some brackets. BR3 Bluetooth RF remote controller and LRS-100-5 AC-DC power supply in the kit for your convenience.
Product Specification
| LED Strip Type: | Color Changing COB RGB LED Strip |
| LED Color: | RGB |
| Input Voltage: | 5V DC |
| PCB Width: | 8mm/0.3" |
| Length: | 5m/16.4Ft |
| Lumen: | 1016lm/m |
| Power: | 14W/M, 70watt/roll |
| Outlet: | 4-pin power wires |
| LED Quantity: | 576 Chips/m, 2880 Chips/roll |
| Beam Angle: | 180° |
| Cut Length: | 20.8mm/0.82" |
| Waterproof Rating: | Indoor IP20, Indoor & outdoor IP67 |
How to Wire COB RGB LED Strip Lights?
Install the 5V RGB led strip like the below wiring diagram, using an RGB controller to change the color and mode. And also it needs a 5V power supply to work.
