| Availability | In Stock |
|---|---|
| Condition | Brand New |
Microwave Sensor RF Switch & Dimmer. Motion detector/RF 2.4G remote/Wireless remote 30m distance.
● Active microwave motion detectors with HF system 10.525GHz, motion can be detected through plastic, glass and thin non-metal materials.
● Built-in motion sensor and daylight sensor.
● Powered by low voltage 9-24VDC, output RF 2.4G signal.
● Matched with RF LED controller or RF dimmable LED driver use.
● Detection area, time delay and daylight threshold can be set via knob potentiometer for each specific application.
● Wide detection area, range up to 20m in diameter.
● Support higher mounting height 15m Max
EMR Specifications Download 
Standards and Certifications
Sensor Data
Working voltage: 9-24VDC
Output signal: RF 2.4GHz
HF system: 10.525GHz
Power consumption: < 0.5W(Standby) , <1W(Operation)
Detection zone: Max.(DxH) 20 x 15m
Detection sensitivity: 10%/25%/50%/75%/100%
Mounting height: 15m Max.
Hold time: 10s/30s/90s/3min/10min/20min/30min
Stand-by time: 10s/30s/90s/3min/10min/20min/30min
Daylight threshold: 10lux/30lux/50lux/100lux/150lux/200lux/Disable
Daylight expected: 50lux/100lux/150lux/200lux/250lux/300lux/400lux
Motion detection: 0.5-3m/s
Detection angle: 150°(wall installation), 360°(ceilling installation)
Warranty: 5 years
Induction type setting
Press hold the SET key 5s: Set as switch type, the LED indicator flash 2 times.
Press hold the SET key 10s: Set as 2-step dimming switch type, the LED indicator flash 4 times.
Press hold the SET key 15s: Set as dimmer type, the LED indicator flash 6 times.
