Go to Top
SuperLightingLED
SUPERLIGHTINGLED CO., LTD
Web: www.superlightingled.com
Email: [email protected]
Date: 2026-11-03 | ID: 5463

Tape to Wire 4-Pin COB RGB LED Strip Light Connector For 10mm PCB

MODEL: 4P-RGB-COB-STW
Price based on selections below:
$1.39
Select Connector Type:1*Strip to Wire Connector + 10cm Wire (Base), 1*Strip to Wire Connector Only
AvailabilityIn Stock
ConditionBrand New
Technical Specifications

Achieve clean, reliable connections for your lighting projects with our Tape-to-Wire 4-Pin Connector, engineered specifically for 10mm COB RGB LED strips. This solderless connector simplifies the process of linking your high-density COB strips to a power source or an RGB controller, eliminating the need for special tools or soldering skills. Its unique design ensures a secure grip and solid electrical contact on the delicate circuitry of COB strips. Available as a standalone connector or with a convenient 10cm pre-attached wire, this 4 pin led light strip connector is the ideal solution for custom installations, repairs, and DIY lighting enthusiasts seeking a professional and durable finish without the hassle.

Key Features

COB-Specific Design

Engineered with piercing contacts that create a secure connection specifically for 10mm 4-pin COB RGB LED strip lights.

Solderless Installation

Features a simple clip-down mechanism that allows you to create a secure tape-to-wire connection in seconds without any soldering.

Secure Locking Grip

The transparent locking cover snaps shut firmly, holding the strip in place and ensuring a stable, long-lasting connection.

Flexible Purchase Options

Choose between the connector only for custom wiring, or a pre-wired version with a 10cm 4-conductor cable for maximum convenience.

Tape to Wire 4 Pin COB RGB LED Strip Light Connector
Close-up view of the 4-pin COB RGB solderless connector.
The connector shown with the optional 10cm pre-attached wire.

Product Specifications

ParameterDetails
Product Model4P-RGB-COB-STW
Product TypeSolderless Tape-to-Wire Connector
Pin Quantity4-Pin
Compatible Strip TypeCOB RGB LED Strip
Compatible PCB Width10mm
Compatible IP RatingIP20 (Non-Waterproof)
Contact TypeInsulation-piercing
Housing MaterialPolycarbonate
Optional Wire Length10cm / ~3.94 inches

Versatile Connection Solutions

Custom Lighting Installations Perfect for creating custom-length wire leads in under-cabinet lighting, cove lighting, and display case illumination, allowing you to easily route power from a remote driver.
LED Strip Repairs & Modifications Quickly repair a damaged section of a COB strip or add a power lead to a leftover segment from a previous project, minimizing waste and extending the life of your lights.
Prototyping & DIY Projects An essential component for makers and hobbyists. Rapidly assemble and test lighting ideas without the commitment and time of soldering, making it easy to experiment and iterate.

How to Use This COB Strip Connector

  1. Ensure your power is off. Confirm you are using a 10mm wide, 4-pin, IP20 non-waterproof COB RGB LED strip.
  2. Gently flip open the transparent cover of the connector.
  3. Carefully slide the end of the COB LED strip into the connector's slot. Make sure it goes all the way in, underneath the metal contact pins.
  4. Align the copper pads on the strip with the connector's pins. Match the polarity markings (+, R, G, B) on the strip to the correct pins.
  5. Press the transparent cover down firmly until you hear and feel it click shut. This action pierces the strip to establish a secure connection.
  6. If using the pre-wired version, connect the four wires to the appropriate terminals on your RGB controller or power source.
⚠ Precautions
  • This connector is designed exclusively for IP20 non-waterproof COB LED strips. It will not work on strips with a silicone or waterproof coating.
  • Always double-check that the polarity of the strip aligns with the connector before closing the cover. Incorrect wiring can damage your LEDs.
  • Ensure the cover is fully latched to maintain a stable and reliable electrical connection.

What's in the Box

  • ✓1 x Tape to Wire 4-Pin COB RGB LED Strip Connector
  • ✓1 x 10cm 4-Conductor Pigtail Wire (Only included if the wired option is selected)
Tape to Wire 4 Pin COB RGB LED Strip Light Connector - photo 1
Demonstrating how to insert a 10mm COB RGB LED strip into the connector.

Frequently Asked Questions

Q: Will this connector work with standard SMD 5050 or 2835 RGB LED strips?

A:No, this connector is specifically engineered for the continuous phosphor and circuit design of 10mm 4-pin COB RGB strips. For SMD strips, please browse our other 4-pin solderless connectors.

Q: Is any soldering required to use this connector?

A:Absolutely not. This is a completely solderless connector that uses sharp, insulation-piercing contacts to establish a secure connection when you snap the cover closed.

Q: Can I use this for outdoor or waterproof COB strips?

A:This model is designed for indoor, IP20 non-waterproof COB strips only. The piercing contacts cannot penetrate waterproof silicone coatings.

Q: What is the difference between the two purchase options?

A:You can buy the connector by itself if you plan to use your own wire. Alternatively, you can select the version that comes with a 10cm (approx. 4-inch) 4-conductor wire pre-attached for convenience.

Q: How can I be sure I'm aligning the polarity correctly?

A:Your COB strip should have markings for +, R, G, and B. Align these markings with the corresponding channels on the connector. The pre-attached wires are typically color-coded for easy identification.

Q: What does 'tape-to-wire' mean?

A:It signifies that the connector is designed to join a flat LED light strip (tape) to flexible electrical wires, enabling you to bridge gaps or connect the strip to a controller or power supply.

© 2026 SuperLightingLED. All specifications are subject to change without notice.