Spec Sheet - 4P-RGB-COB-STS

Availability	In Stock
Condition	Brand New

Effortlessly join two segments of 10mm 4-pin COB RGB LED strip lights with the 4P-RGB-COB-STS Solderless Tape-to-Tape Connector. This essential accessory eliminates the need for soldering, providing a clean, secure, and reliable link for extending runs or repurposing strip off-cuts. Specifically engineered for the unique flat surface of COB strips, this 4 pin led light strip connector ensures a superior connection compared to standard SMD connectors. Whether you're creating long, continuous lines of dotless light for architectural coving or customizing under-cabinet lighting, this solderless LED connector makes the process quick and simple. Its transparent housing allows for easy visual confirmation of proper alignment, guaranteeing a flawless electrical connection for vibrant, uninterrupted color.

Key Features

Solder-Free Installation

Features a simple clamp-down design that creates a secure connection in seconds without any soldering or special tools.

Designed for COB Strips

Engineered specifically for the continuous phosphor surface of 10mm COB RGB LED strips, ensuring a reliable and stable connection.

Seamless Straight Connections

Perfect for joining two strip segments end-to-end to create longer, continuous runs without any gaps in illumination.

Clear Housing

The transparent body allows you to visually inspect the connection and ensure the strip's contact pads are correctly aligned with the pins.

Technical Highlights

Piercing contacts designed to make a solid connection through the COB strip's circuit board.
Secure locking mechanism prevents accidental disconnection.
Supports the full color spectrum of 4-wire RGB LED strips.

Solderless COB RGB LED Strip Light 4 Pin Connector — Close-up of the 4-pin solderless connector for COB RGB LED strips.

Product Specifications

Parameter	Details
Product Model	4P-RGB-COB-STS
Product Type	Solderless LED Strip Connector
Connector Style	Strip-to-Strip
Pin Count	4
Compatible Strip Width	10mm
Compatible Strip Type	IP20 Non-Waterproof COB RGB LED Strips
Wire Length	15cm / 5.9 inches
Housing Material	Polycarbonate
Contact Material	Copper
Max Voltage	DC 24V

Application Scenarios

Extended Cove & Ceiling Lighting Seamlessly join multiple COB RGB LED strips to create long, unbroken lines of dotless light for large architectural coves, tray ceilings, and soffits. Ensure consistent color and brightness across the entire length.

Custom Under-Cabinet & Shelf Lighting Utilize leftover pieces of LED tape by connecting them to create perfectly sized lighting for kitchen cabinets, bookshelves, or display cases. This connector makes it easy to customize lengths without wasting material.

DIY Lighting Projects & Repairs An essential tool for DIY enthusiasts and professionals. Quickly repair a damaged section of a strip or connect segments for custom signs, accent lighting, or backlighting projects without the hassle of soldering.

How to Use This Solderless Connector

Ensure the power to your LED strips is turned off.
Cut your 10mm COB RGB strip cleanly along a designated cut line.
Open the transparent cover of the connector by gently prying it upwards.
Carefully slide the end of the LED strip into one side of the connector, making sure it goes underneath the metal contact pins.
Align the copper pads on the strip with the pins inside the connector. Check that the polarity markings (+, G, R, B) on the strip correspond to the channels.
Press the transparent cover down firmly until it clicks securely shut. You should feel it lock in place.
Repeat steps 4-6 for the second strip segment on the other side of the connector.
Visually confirm that both strips are fully inserted and the polarity is matched across the connection.
Restore power and test your newly connected LED strip lights.

⚠ Precautions

This connector is designed exclusively for 10mm wide, 4-pin COB RGB LED strips.
For use with IP20 non-waterproof strips only. Not suitable for strips with silicone or epoxy coatings.
Always double-check polarity alignment before closing the connector. Incorrect wiring can damage your LED strips.
For high-power applications or installations where the connection will be subject to physical stress, soldering remains the most durable connection method.

What's in the Box

✓1x Solderless 10mm Tape to Tape COB RGB LED Strip 4-Pin Connector (Model: 4P-RGB-COB-STS)

Solderless COB RGB LED Strip Light 4 Pin Connector - photo 1 — Demonstration of a 10mm COB RGB strip inserted into the connector.

Solderless COB RGB LED Strip Light 4 Pin Connector - photo 2 — The 4P-RGB-COB-STS connector linking two pieces of COB LED strip.

Frequently Asked Questions

Q: Will this connector work with standard SMD 5050 or 2835 RGB strips?

A:While it may physically fit, this connector is specifically designed for the flat, uniform surface of COB RGB LED strips to ensure the most reliable connection. For SMD strips, we recommend using connectors designed for them.

Q: Is this 4 pin led light connector waterproof?

A:No, this connector is designed for use with IP20 non-waterproof LED strips and should only be used in dry, indoor locations.

Q: Do I need any special tools for installation?

A:No, this is a completely solderless led strip connector. You only need a pair of scissors to cut the strip on the marked line; no other tools are required.

Q: Can I use this to make a 90-degree corner turn?

A:This model is a straight, tape-to-tape connector for extending strips in a line. For corners, you will need a dedicated L-shape connector from our 4-pin accessories category.

Q: What is the maximum current this connector can handle?

A:These types of solderless connectors are generally suitable for standard LED strip applications and are typically rated for up to 5 Amps. For high-density strips or very long runs drawing more current, we recommend a soldered connection.

Q: The lights are flickering after installation. What should I do?

A:Flickering usually indicates a poor connection. Turn off the power, open the connector, and ensure the strip is cut cleanly and pushed all the way in, with the copper pads making firm contact with the internal pins. Also, verify the polarity is correct.

Solderless 10mm Tape to Tape COB RGB LED Strip Light 4-Pin Connector