Go to Top
SuperLightingLED
SUPERLIGHTINGLED CO., LTD
Web: www.superlightingled.com
Email: [email protected]
Date: 2026-11-03 | ID: 5493

4-Pin SMD LED Strip Light Connector For 10mm High Density RGB LED Strip

MODEL: RGB-SMD-STS
Price based on selections below:
$0.79
Apply to:IP20 Bare PCB Boards (Base)
Select PCB Width:8mm (0.31in) (Base), 10mm (0.39in) (Base)
AvailabilityIn Stock
ConditionBrand New
Technical Specifications

Create ultra-secure, permanent connections between LED strip segments with the 4-Pin Pierce-Down Connector. Unlike other snap-on connectors that can loosen over time, this connector uses a robust insulation-piercing mechanism. By using a simple pair of pliers, the internal pins pierce directly through the PCB of the strip, forging a strong, vibration-resistant electrical bond.

This method is ideal for creating gapless connections between high-density 4-pin RGB LED strips or 4-wire addressable LED strips. Available for both 8mm and 10mm wide IP20 non-waterproof strips, it offers a reliable, solder-free solution for professional installations and demanding DIY projects where connection integrity is paramount.

Key Features

Secure Piercing Connection

Utilizes a plier-actuated crimp that pierces the PCB for a permanent, highly reliable electrical connection.

Gapless Board-to-Board Design

Connects strip segments end-to-end with no gap, ensuring continuous, uniform light output without dark spots.

Dual Width Compatibility

Available in two sizes to perfectly fit either 8mm or 10mm wide 4-pin non-waterproof LED strips.

Transparent Housing

The clear body minimizes shadows and visual obstruction, maintaining the aesthetic of your lighting installation.

Product Specifications

Parameter Details
Product Model RGB-SMD-STS
Product Type Board-to-Board Pierce-Down Connector
Pins 4
Available PCB Widths 8mm (0.31in), 10mm (0.39in)
Compatible Strip Types 4-Pin RGB LED Strips, 4-Wire Addressable LED Strips
Applicable IP Rating IP20 (Non-Waterproof, Bare PCB)
Housing Material Transparent Polycarbonate

Application Scenarios

Custom Linear Fixtures & Cove Lighting Perfect for joining segments of RGB or addressable LED strips to create custom lengths for under-cabinet lighting, display cases, and architectural coves. The secure piercing connection ensures long-term reliability in fixed installations.
Prototyping and DIY Electronics Hobbyists and makers can quickly and securely link segments of 4-wire addressable LED strips for projects without the need for soldering. The robust connection is superior to temporary solutions in finished projects.

How to Use This Connector

  1. Confirm your LED strip is a non-waterproof (IP20) 4-pin type with the correct PCB width (8mm or 10mm).
  2. Carefully slide the end of the LED strip into the connector, making sure the four copper pads on the strip align perfectly with the four metal pins inside.
  3. Take a pair of pliers and apply firm, even pressure to the metal pin assembly. You will feel the pins push through and pierce the flexible PCB.
  4. Repeat the process for the second LED strip segment on the other side of the connector.
  5. Once both sides are crimped, gently tug on the strips to confirm the connection is secure before reconnecting to power.

4 Pin SMD RGB LED Strip Light Connector

⚠ Precautions
  • This connector is designed for a single, permanent use. It is not reusable.
  • Ensure correct polarity (+, G, R, B) is aligned before crimping the connection.
  • For use with IP20 bare PCB strips only. The pins cannot penetrate silicone, epoxy, or other waterproof coatings.
  • Always disconnect power from your LED strips before installation.

What's in the Box

  • ✓1x 4-Pin SMD LED Strip Light Pierce-Down Connector
© 2026 SuperLightingLED. All specifications are subject to change without notice.