| Availability | In Stock |
|---|---|
| Condition | Brand New |
DALI AC Triac Dimmer DT-B. 1DALI address / 1 Channel output / Trailing edge.
Features
● AC phase-cut mosfet DALI dimmer, one DALI address, and one channel output.
● Trailing edge dimmer.
● The minimum brightness is adjustable.
● In accordance with DALI standard protocol 101, 102, 205 (IEC 62386) and in compliance with DALI products from other international incorporation.
● DALI address can be automatically assigned by DALI master.
● To dim and switch single-color dimmable LED lamps, traditional incandescent and halogen lights.
● Over-heat protection, Overload protection, recover automatically.
DT-B Manual Download 
Standards and Certifications
Product Specification
| Model: | DT-B |
| Input voltage: | 100-240VAC |
| Output voltage: | 100-240VAC |
| Output power: | 150-360W |
| Output current: |
Max 1.5A |
| Warranty: | 5 years |
| Operation temperature: | Ta: -30℃ ~ +55℃ |
| Case temperature (Max.): | Ta: +70℃ |
| IP rating: | IP20 |
| Load Type | Maximum Load | Remarks |
| Dimmable LED Lamps |
200W@220V 100W@110V |
Due to variety of LED lamp designs, maximum number of LED lamps is further dependent on power factor result when connected to dimmer. |
| Triac Dimmable LED Drivers |
200W@220V 100W@110V |
Maximum permitted number of drivers is 200W divided by driver nameplate power rating, and make sure the surge current is no more than 2 times 65A. |
| Incandescent Lighting, HV Halogen Lamps |
400W@220V 200W@110V |
/ |
Caution: Please carefully ensure all wire connections and polarities are correct and secure before applying power, otherwise this controller will be damaged.
Note: When calculating the maximum number of load lamps or drivers, the input power or input current parameters of a single lamp or driver must be used, the output power parameters can not be used.
In addition, the maximum surge current of the dimmer is 65A, and the sum of surge current of multiple dimmable LED drivers should not exceed 2 times. otherwise, the product will be overloaded and damaged.