| Select Specification: | 500ML/Bottle (Base), 1000ML/Bottle |
|---|---|
| Shipping Time: | 2 Weeks (Base) |
| Availability | In Stock |
| Condition | Brand New |
The silicone adhesive surface primer is suitable for silicone strips, silicone products, foam silicone strips, heat-conductive silicone, foam rubber, TPR, foam EVA, PC, and other materials to stick double-sided adhesive tape or backing. Low odor, fast curing, no trace.
Product Name: Silicone Surface Treatment Agent
Ingredients: Silicone polymer
Appearance: Transparent mucilage
Specification: 500ML/bottle, 1000ML/bottle
Storage: six months (≤25℃) when the container is not opened
Material Safety Datasheet Download 
Usage method
( 1 ) Remove dirt ( such as oil, release agent, etc. ) from the object's surface.
( 2 ) Brush or spray the backing adhesive treatment agent on the substrate. It shall be completely covered and evenly distributed.
( 3 ) Place the material coated with the treatment agent and dry it at room temperature for 2-8 minutes. Be careful not to have dust pollution.
( 4 ) Stick double-sided adhesive tape, press it with a bonding machine or roll it back and forth by hand with a wooden stick.
( 5 ) When it is dried after bonding, the bonding strength will be further improved during drying. After 2 hours, it basically tends to be stable, and it can reach the test intensity in 24 hours.
Frequently Asked Questions about Silica Gel Treatment Agents
What is the reason why you can't stick?
1. Is the surface of the bonded object dry and free of other substances? The surface must be dry and dust-free.
2. Is it pressed in place after bonding? When applying double-sided adhesive tape after coating the treatment agent, pressure needs to be applied.
3. The placement time after bonding is not long enough. The longer the placement time, the stronger the bond. Don't pull it out when it's not completely cured.
4. Is the treatment agent evenly brushed? The treatment agent should be brushed evenly, not too thick, or too thin.
Precautions
1. The primer should be stored in a dry and cool place away from a heat source and open flame;
2. The workplace should be fireproof and ventilated to prevent long-term inhalation or long-term skin contact;
3. The product is volatile. Please tighten the container cover after use;
4. Shake well before use, and the effect is better.
5. Away from children.
6. Avoid direct sunlight.
