| Select Kit: | LED Strips (Base), LED Strips + Controller + Power Supply, LED Strips + Controller |
|---|---|
| Select Length: | 16.4ft (5 meters) (Base), 6.56ft (2 meters), 3.3ft (1 meter) |
| Select PCB Width: | 17mm (0.67") - 3 Pin - 12V (Base) |
| Select Waterproof Rating: | Non-Waterproof IP20 - Adhesive Back (Base), Outdoor Silicone Tube IP67 - With Brackets |
| Availability | In Stock |
| Condition | Brand New |
A 180LEDs/m highest density WS2811 12V even lighting ARGB led strip, LEDs and electronics are discharged side by side with a PCB width of 17mm (0.67 inches). This lighting design allows for higher LED density to be achieved, resulting in more uniform dream color lighting. The high density WS2811 LED strip gives a more even light whether installed directly or with neon tube or aluminum profile housings.
LEDs are controlled by WS2811 external ICs, 12V drive, one WS2811 IC controls 3 5050 LEDs, 16.66mm cuttable. The 12V WS811 strip light comes with 3pin JST connectors and 2pin power wires on both ends, follow the signal arrows to connect the addressable led controller and make multiple runs.
Due to the density of the WS2811 ARGB led strip is too dense, you can only connect the cut light strip by soldering. 5m/16.4ft per roll.
Kit: CONFULL-SP638E Bluetooth addressable led strip controller, LRS-200-12 Meanwell led power supply.
WS2811 Datasheet Download 
Product Specification
| Light Strip Type: | 12V WS2811 ARGB LED Strip |
| LED Chip: | SMD5050 + External WS2811 IC |
| Input Voltage: | DC12V |
| Power: | 25W/m, 125W/16.4ft Max. |
| Working Temperature: | -20℃~+45℃ |
| Storage Temperature: | -20℃~+60℃ |
| LED Color: | Addressable RGB |
| PCB Width: | 17mm/0.67" |
| LED Quantity: | 180 LEDs/m, 900 LEDs per roll |
|
IC Quantity:
|
60 ICs/m, 300 ICs per roll
|
|
Cut Unit:
|
3 LED can be cut (16.66mm)
|
| Waterproof Rating: | Non-waterproof IP20, Outdoor Waterproof IP67 |
| Strip Length: | 5m/16.4ft |
How To Wire 3 Pin WS2811 ARGB LED Strip?
