| Select Aluminum Profile: | Forward+Flange(Silver), Forward(Silver), 90° Light-emitting(Silver)*Recommend*, Forward(Black), Forward+Flange(Black), 90° Light-emitting(Black), No (Base) |
|---|---|
| Select Electrical Enclosure: | No (Base), Yes - Package controller and power supply |
| Select Input Voltage: | DC12V-24V (Base) |
| Select Kit: | Controller (Base), Controller+COB RGB Strip+Power Supply, Controller+SMD RGB Strip+Power Supply |
| Select Stair Width: | 1.96ft (0.6meter) (Base), 1.64ft (0.5 meter) (Base), 2.62ft (0.8meter) (Base), no (Base), Customized length, Note when placing an order |
| Select Steps Number: | 16 (Base), 20 |
| Select Wiring Type | Main Line Wiring (Base) |
| Availability | In Stock |
| Condition | Brand New |
This is an indoor step lighting controller for controlling RGB stair light strips, outputting 16 or 20 step light channels. This RGB stair lights controller allows you to adjust the brightness, time delay, speed, and mode of the overall staircase lighting.
With PIR motion sensing technology, the step lights are triggered to come on automatically when the PIR sensor detects human activity. The stairway lights will not stay on constantly, they will turn off automatically. The amount of time the light stays on can be set through the time delay setting.
In terms of installation, this RGB step lights controller takes mains wiring, all the step lights are connected through one mains wire, which is easy and convenient to use.
Note that this RGB Step Lighting Indoor Stair Controller can only carry a maximum current of 10A, the maximum power of DC12V input is 120W, the maximum power of DC24V input is 240W, according to the number of steps and the power of the RGB strip to reasonably determine the length of the step light strip.
Features
RGB colorful staircase light, customize the color of each step lighting, 16 or 20 channels.
With light sensor, choose whether to turn on the stair lighting under different light conditions.
PIR motion sensor, step light turns on and off automatically.
Mains wiring, easy to install, Dupont connector
Step light color, brightness, time delay, speed, mode adjustable
Maximum current 10A, DC12V input maximum power 120W, DC24V input maximum power 240W
| Modes | Brightness | Time Delay | Speed |
| FF01 - All step lights on | HH01 - 2% | LL01 - 4s | EE0 - 150ms |
| FF02 - One by one step lights on | HH02 - 3% | LL02 - 6s | EE0 - 175ms |
| FF03 - Two by two step lights on | HH03 - 4% | LL03 - 8s | EE0 - 200ms |
| FF04 - Three by three step lights on | HH04 - 5% | LL04 - 10s | EE0 - 225ms |
| FF05 - One by one follow | HH05 - 6% | LL05 - 12s | EE0 - 250ms |
| FF06 - Two by two follow | HH06 - 7% | LL06 - 14s | EE0 - 275ms |
| FF07 - Three by three follow | HH07 - 8% | LL07 - 16s | EE0 - 300ms |
| FF08 - One by one chase | HH08 - 9% | LL08 - 18s | EE0 - 325ms |
| FF09 - Two by two chase | HH09 - 10% | LL09 - 20s | EE0 - 350ms |
| FF10 - Three by three chase | HH10 - 11% | LL10 - 22s | EE0 - 375ms |
| FF11 - Seperated chase | ... | ... | ... |
| FF12 - Auto change all modes 01-11 | HH99 - 100% | LL99 - 200s | EE99 - 2600ms |
How to Set:
Long press the "Setting" on the controller to enter the setting state (set step numbers, brightness, time delay, speed, and mode). And short press the "Setting" to set the next setting. After all setting has done, long press the "Setting" to save. Choose CH-3 for RGB mode.
Product Specification
Input Voltage: DC12-24V
Material: ABS
Output Current: 10A max.
Number of Steps: 16/20, max 50
Controller Dimension: 104mm*72mm*20mm
PIR Sensor Dimension: 14mm*17mm for recessed, 30mm*14mm*16mm for surface mount
Light Sensor Dimension: 35*18mm
Brightness: 2%-100%
Speed: 150ms-2600ms
Delay Time: 4s-200s
Lighting Mode: 12
IP Rating: IP20 Indoor
