| Select Channel Color: | Silver (Base) |
|---|---|
| Select Cover Length: | Cut to Your Order Length (Base), Whole Roll Not Cutting (Base) |
| Select Diffuser: | Silicone semi-clear diffuser (Base) |
| Select Length: | 3.28ft (1 meter) (Base), 6.56ft (2 meters), 8ft (2.44 meters), 20cm (7.87in) Sample |
| Availability | In Stock |
| Condition | Brand New |
This is a flexible led channel trim around ceiling. Installing led molding channels at the edges of the ceiling allows for downward illumination, and it creates a soft, even lighting effect in the room. This wall wash lighting provides a more comfortable visual experience of the space and improves the ambiance of the room. Built into gypsum board/plank or other ceiling finishes for stable installation.
3213LR ceiling light wall wash edge molding works with LED strip lights. Since the ceiling edge molding needs to be bent left-right, attaching the led strip to the bottom of the channel requires an S-shaped strip (up to 10mm wide); if the strip is attached to the side, a strip size of less than 7mm is required. The minimum bending diameter is 450 mm.
You can choose a long diffuser cover piece or several diffuser covers to meet your installation needs, e.g. you purchase 10pcs 1m 3213LR channels, we will send you 10pcs 1m diffuser covers or 1pcs 10m diffuser cover.
If you choose the QSG-3213LR type, there are up-down bending version 3213UD Model and straight version 3213 Model that can be used with it together for seamless curved lighting lines.
Note 1) Due to DHL/UPS shipping requirements, for any 2-meter aluminum profile order with a quantity of less than 10 pieces, an additional extra length charge will be applied depending on the situation.
Note 2) We suggest using multiple 1-meter or 2-meter moldings spliced together, the silicone cover can be one continuous strip.
Product Specification
| Product Type: | Curved LED Wall Wash Ceiling Edge Trim Molding |
| Material: | 6063-T5 Aluminum Alloy |
|
Channel Size:
|
W32.7mm(1.3")*H13.2mm(0.52")
|
| Inner Width: | 10.3mm(0.4") |
| Color: | Anodic silver oxidation |
| LED Diffuser: | Semi-clear silicone diffuser cover |
| Length: | 1m(3.28ft), 2m(6.56ft) |
| Accessory: | 1*flexible aluminium profile, 1*silicone cover, 2*end cap |
| Min Bend Diameter: | 450mm/17.7"/1.5ft |
| Installation: | Recessed |
| Apply to: |
5mm/6mm led light strips for side 8mm/10mm S type led strips for bottom |
