| Select Applied to: | DMX512 Decoder (Base) |
|---|---|
| Select Channel: | 1 to 1 (Base), 1 to 4, 1 to 8 |
| Select Input Voltage: | AC90~265V (Base) |
| Availability | In Stock |
| Condition | Brand New |
Summarize of produce
The product is our company general lighting control system of 4 CH 20 A EPX rail switch extension, can output 4 circuits, per circuit includes a set of AC output power and a set of output, change the extension to receive the widespread adoption of international DMX - 512 standard protocol, DMX control signal can be converted to switch signal to control relay switch, can control of extension to set single zone and more zones.Support compatible with yong Lin EDX protocol, with software and panel to control.
Standards and Certifications
Controller Technical Parameters
Input power: AC100-240V
Output: each circuits 5A
Communication protocol: EDX/DMX-51
Working temperature: -20-60℃
Working power consumption :
Installation: 5MM rail
Signal connector : 4 PIN Green terminal station 5.0mm
External dimension: 186(W)×92(H)×61(D)mm
Specifications Download 
Key Interface Instructions
|
serial number |
function |
Instructions |
|
1 |
function key |
FCN DMX ▲ ▼ ◀▶ |
|
2 |
Digital display screen |
display setting or output Parameters |
|
3 |
circuits switch |
ON-circuits forced open,off-circuits forced close |
|
4 |
the power input port |
AC power input terminal station (100-240V) |
|
5 |
output port |
4 circuits AC power output terminal station |
|
6 |
input DMX/EDX connector |
connect D+and D- signal line |
|
7 |
Power light |
When power on,the power light bright |
|
8 |
DMX communications light |
Often off, extension and host in communication, helight flash |
|
9 |
output DMX/EDX connector |
connect with another extension to input DMX connector |
Attention matters
Trouble remova
|
serial number |
phenomenon |
reason |
The solution |
|
1 |
No output load |
1.;no power 2. Output overload 3. D+ and D- inversely connect |
1. Check the power supply 2. check connect line |