| Select Kit: | Controller + Download Wire (Base) |
|---|---|
| Select Light Color : | Addressable RGB (Base), Addressable RGBW - LEDeasy - TF Type Only (Base) |
| Select Operating Voltage: | 7-12V (Base), 5V (Base), 3.6V (Base), 24V (Base) |
| Select Software Type | SDEdit (Base), LEDeasy (Base) |
| Select Type: | Mini Type (3 buttons) (Base), TF Card Type (6 buttons) |
| Availability | In Stock |
| Condition | Brand New |
Small size, powerful SPI/TTL led control board for addressable RGB and RGBW led strip lighting, one channel signal output, supports up to 1024 or 2048 pixels, integrates 3.6V, 5V, 7-12V, 24V working voltages. Equipped with two kinds of programming software LEDeasy or SDedit, very convenient and fast to make light strip and matrix effects. LEDeasy or SDedit computer software is powerful, easy to operate, also can capture animation, import animation, import pictures, built-in many color effects.
Programmable Light Board Controller with TF Card can run up to 20 programs at a time, max 2048 pixels.
1) Indicator light blinks fast (about 3 times a second): the board controller is working normally.
2) Indicator light is flashing slowly (about one flash per second): there is no legal file in the TF card of the light board controller.
3) Indicator light is always on: the controller does not detect the TF card. The TF card may be damaged or the TF card is not in FAT32 format.
There are 6 buttons on the control board (On/Off, Run/Stop, Next, Auto, S+, S-):
RUN/STOP to pause/continue the program running;
S+ and S- to speed up and slow down the program playing speed;
On/Off to turn on and off the light;
NEXT to run the next program and this program has been running in a loop;
AUTO to run all the programs in the TF card in a loop.
How to set the right voltage for your strip light:
24V voltage: Disconnect all 12V, 5A, and 3.6V pads.
12V voltage: Connect two 12V pads with tin.
5V voltage: Disconnect 12V and connect two 5V pads with tin.
3.6V: Disconnect 12V, connect two 5V pads and two 3.6V pads with tin.
Mini Programmable Light Control Board can run up to 5 programs at a time, wih max 1024 pixels.
The indicator light is flashing when the mini controller is working normally.
Mini control board with 3 buttons (N, S+, S-):
1) Short press N to switch to the next program, long press N to cycle through all programs;
2) S+ and S- are for speeding up and slowing down the program playback speed, long press S+ and S- to return to the initial speed.
Product Specification
| Product Name: | Programmable LED Lighting Control Board |
| Output Signal: | SPI / TTL |
| Output Channel: | 1 |
| Support Color: | Addressable RGB and Addressable RGBW |
| Input Voltage: | DC 3.6V, 5V, 12V, 24V |
| Computer Software: | SDedit or LEDeasy |
| Max Control Pixels: | Mni Type (1024 pcs), TF Card Type (2048 pcs) |
| Dimensions: | Mini Type (13mm*41mm), TF Card Type (L90mm*W22mm) |
| IP Rating: | IP20 non-waterproof |