Go to Top
SuperLightingLED
SUPERLIGHTINGLED CO., LTD
Web: www.superlightingled.com
Email: [email protected]
Date: 2026-10-09 | ID: 663

TM10 86 Type Touch Switch Controller, SCR Low Voltage Control Dimmer

MODEL: TM10
Price based on selections below:
$15.98
AvailabilityIn Stock
ConditionBrand New
Technical Specifications

The 86-type touch switch controller adopts the popular local tyrant gold as the main colour and has a beautiful appearance, conciseness and generosity. The controller uses a capacitive touch and sensitive touch. The product uses a button to replace the switch and dimming. The operation is convenient, simple and modern. The preferred product for the home.

 

Standards and Certifications

CE FCC  RoHS ISA SGS ISO  warranty

 

Technical Parameters

● Working Temperature: -20-60℃

● Power Supply Voltage: AC90 to 240V

● Output Voltage: AC90 to 240V

● Dimensions: L86*W86*H36.7mm

● Packing Size: L105ΧW105ΧH53mm

● Net Weight: 0.152kg

● Gross Weight: 0.210kg

● Maximum Output Current: 1A

● Maximum Output Power: 90W/90V 240W/240V

● Control Method: SCR

Specifications Download   PDF  

 

Dimensions

TM10 86 Type Touch Switch Controller, SCR Low Voltage Control Dimmer - photo 1

TM10 86 Type Touch Switch Controller, SCR Low Voltage Control Dimmer - photo 1 - photo 1

Interface instruction

TM10 86 Type Touch Switch Controller, SCR Low Voltage Control Dimmer - photo 2

1. Load output (N)

2. Load output (L)

3. AC input (N)

4. AC input (L)

 

Instructions for use

TM10 86 Type Touch Switch Controller, SCR Low Voltage Control Dimmer - photo 3When the button is short-pressed with a finger, the output load is cyclically switched between four brightness levels of 100%---75%---50%---25%. When the button is long-pressed with a finger for more than 2S, the load is controlled Output on/off.

installation method:

1) Wiring:

Please refer to the interface description for wiring diagram

2) Open the touch panel:

TM10 86 Type Touch Switch Controller, SCR Low Voltage Control Dimmer - photo 4

3) Install the controller base:

As shown in the figure, after connecting the wires, install the touch controller in the wall cassette, then tighten the screws to fix it on the wall, and install the base on the wall

TM10 86 Type Touch Switch Controller, SCR Low Voltage Control Dimmer - photo 5

4) Cover the touch panel:

Optimistic about the direction of the panel, cover the panel as shown below:

TM10 86 Type Touch Switch Controller, SCR Low Voltage Control Dimmer - photo 6

 

Typical application

TM10 86 Type Touch Switch Controller, SCR Low Voltage Control Dimmer - photo 10

Remark

1. Connect the load wire at first, following by the power wire; Please ensure short circuit can 

not occur between connecting wire before you turn on the power;

2. The supply voltage of controller ranges in DC12-24V, it may burn out the controller once 

exceed the voltage.

3. The remote control enter sleep mode after 30s, now the function of chromatic circle is not 

working. If you need to use the remote, please press any key on the remote to awaken it.

 

© 2026 SuperLightingLED. All specifications are subject to change without notice.