| Select Control Type: | RF remote, IR Infrared Remote (Base) |
|---|---|
| Select Input Voltage: | 110V±20% (US, CA) (Base), 220V±20% (EU, UK, AU) (Base) |
| Select Plug Type: | US (Base), UK (Base), EU (Base), AU (Base) |
| Availability | In Stock |
| Condition | Brand New |
Our 1500W-2500W 110V-220V led remote controller with IR or RF remote is used to control AC high voltage single color led strips. It uses RF or IR remote to adjust the brightness precisely. The controller also comes with a knob brightness switch.
This led strip light controller remote features a time-delay switch function, which can realize timer control of lights. The memory function of this led tape controller is highly convenient as it retains the settings, avoiding repeated adjustments.
Instructions for Use:
1. Insert the light strip plug into the AC plug power cable. The positive and negative poles should be corresponded. Pay attention to check whether there is a short circuit at the pin position. If there is a short circuit, please deal with it and then turn on the power, otherwise the LED dimmer and the strip light will be damaged.
2. Turn on the power, and then the LED lights can be controlled using the configured handheld remote.
3. When installing the controller, install the receiver in a position free of obstacles to avoid remote control failure.
| Product Type: |
High Voltage LED Dimmer Controller
|
| Working Voltage: | AC 110V/220V |
| Output Channel: | 1CH |
| Product power: | 110V≤1500W, 220V≤2500W |
| Control Distance: | 30m/98.4ft max |
| Control Signal: | RF / IR |