12mm SMD RGB LED Strip to Wire 4 Pin Connector Cable Solderless

4 pin cable connector designed for 12mm wide SMD5050 or SMD3535 RGB led strips, quickly and easily connect the cut RGB led strip to the RGB controller or RGB led driver without manual soldering, easy to operate and saves time and energy. The transparent plastic 4 pin led strip to wire connector has a cable length of about 10cm and the copper pins ensures stable and reliable electrical contact with the RGB strip.

• Solder-Free Design: Simply place or fit the solder joints of the 12mm RGB led strip light under the 4 pins of the connecting cable, and use a tool to depress the pins to pierce the PCB board to establish an electrical connection and easily light up the RGB light strip. 

• Easy to Operate: no complicated soldering steps, just align the 4 pin points and press the pins to complete the connection, suitable for DIY enthusiasts.

• Safe and Reliable: The 12mm RGB led strip to wire connector is made of high quality materials, avoiding poor contact or short circuit problems caused by improper welding.

Precautions

1) Avoid electrical operation: When connecting or disconnecting the RGB light strip, please make sure the power is off to avoid electric shock.

2) Align the pins: When connecting, please make sure the connector pins are aligned with the 4 pins of the RGB tape to ensure correct and stable electrical connection.

3) Cannot be used for COB RGB led strips as the sealing layer causes the height to be too high to fit this cable connector 4 pin.

4) Cannot be used for ultra-high density RGB strip lights with or above 120 LEDs per meter.

Product Specifications

Item Type: 4-Pin RGB LED Strip Cable Connector

Wire Type: Strip to Wire

Apply to: SMD rgb led strip lights

Pins: 4 pin

PCB Width: 12mm

Wire Length: 10cm (3.93in)