| Select Connector: | 2-Pin (V+, GND) (Base), DC Female Connector (Black) |
|---|---|
| Select Kit: | LED Strips (Base), LED Strips + Power Adapter |
| Select Length: | 16.4ft (5 meters) (Base) |
| Select Operating Voltage: | 12VDC (Base), 24VDC (Base) |
| Select Waterproof Rating: | Non-Waterproof IP20 - Adhesive Back (Base), Surface Glued IP65 - Adhesive Back, Underwater IP68 - Adhesive Back, Waterproof IP67 - Adhesive Back |
| Wavelength: | 830nm (7 Days), 810nm (1-3 Days), 810nm (7 Days) (Base) |
| Availability | In Stock |
| Condition | Brand New |
810 nm wavelength LED light belongs to the near infrared spectrum, with unique deep penetration ability and red light therapy, photobiomodulation, sauna effect, widely used in the field of medical treatment, beauty, health and so on. 810nm LED light presents a very obvious red light spot in human eyes.
This 810nm LED IR light strip uses high efficiency SMD 2835 as the light source, 600 pieces of 810nm LEDs are evenly arranged on a five meter long flexible circuit board. Two adjacent 810 nm LED diodes are spaced at a distance of 8.33 millimeters apart to bring uniform radiation to your 810nm light application. Accepts DC 12 volt or 24 volt inputs, safe for home use.
You may also like our other models of 810 nm IR led light strip.
• High density LED diode 810nm/830nm with low power consumption
• 2835 single-core 810 nm LED chip, dimmable
• Comes with a 10-15cm power cord on both sides, red for positive and black for negative
• Black DC female cable for power adapter connection is optional
• 96 watts power adapter in the kit (PSPS-12V-96W or PSPS-24V-96W)
• Easy to install with adhesive backing
Near IR LED Wavelength 810nm Spectrum Download 
Product Specification
| LED Strip Type: | Near Infrared LED Strip Light |
| LED Type: | SMD2835 |
| Input Voltage: | DC12V, DC24V |
| Power: | 40W/Roll, 8W/m, 2.44W/ft |
| Light Wavelength: | 810 nanometer |
| Width: | 8mm/0.3" for IP20 and IP65, 10mm/0.4" for IP67 and IP68 |
| Length: | 5m, 16.4-ft |
| Height: | 1.4mm |
| LED Color: | Red |
| LED Quantity: | 120 LEDs/m, 600 LEDs/reel |
| Cuttable: |
DC12V - 3 LEDs, 25mm/1" DC24V - 6 LEDs, 50mm/2" |
| Connector: | 2-pin power cord or DC female connector at both sides |
| Connector Length: | 10-15cm (4"-6") |
| Waterproof Rating: | Non-waterproof IP20, Waterproof IP65 IP67 IP68 |
| Beam Angle: | 120° |
| Lifespan: | 50,000 hours + |