| Select Input Voltage: | DC24V (Base), DC12V (Base) |
|---|---|
| Select Kit: | LED Strips (Base), LED Strips + Controller + Power Supply |
| Select Length: | 16.4ft (5 meters) (Base) |
| Select Waterproof Rating: | Non-Waterproof IP20 - Adhesive Back (Base), Surface Glued IP65 - Adhesive Back, Underwater IP68 - Adhesive Back, Outdoor Silicone Tube IP67 - Adhesive Back |
| Availability | In Stock |
| Condition | Brand New |
SuperLightingLED's 660nm + 660nm + 850nm tri-band strip light is special for red light therapy and aiding plant growth. There are three wavelengths inside each SMD5050 LED. The visible 660nm red light improves skin health, promotes cellular repair, enhances photosynthesis in plants, and is used as an aid during plant flowering and fruiting; the invisible 850nm near-infrared light works on deep muscles, bones, and joints. Flexible adjustment of wavelengths and modes via three color channels controller.
660nm is a very visible deep red light in LED lamps. Dual 660nm wavelength red lights are designed to enhance the therapeutic depth and uniformity of the red wavelengths, enhance collagen synthesis. Although 850nm is invisible, there is a slight red glow phenomenon in LED lights, which is not easy to be seen under sufficient light conditions, and the NIR red light will be more obvious in dark conditions.
We offer a WLED programmable PWM controller and a LRS-100 Meanwell power supply in the strip light kit.
• 660nm deep red and 850nm near infrared LED
• 660nm+850nm+660nm three-in-one SMD 5050 light sources
• 12V or 24VDC input, 14.4 watts per meter, 4.4 watts per foot
• 10mm wide flexible PCB board with yellow double-sided adhesive backing
• With 4-pin wire tales, black-V+, green-660nm, red-850nm, blue-660nm
• IP20, IP65, IP67, IP68 protection ratings available for dry and wet locations
| LED System: | Special Wavelength Lighting Systems |
| Brand: | SuperLightingLED |
| LED Strip Type: | Tri-Band Red Light & NIR Light LED Strip |
| Light Wavelength: | 660 nanometer (green wire) + 850 nanometer (red wire) + 660 nanometer (blue wire) |
| Application Focus: | Photobiomodulation, Beauty & therapy devices, Plant growth boosting |
| LED Chip: | 3-in-1 SMD5050 |
| Input Voltage: | DC12V, DC24V |
| Power: | 72W/Reel, 14.4W/m, 4.4W/ft |
| LED Color: | Visible Red + Invisible NIR |
| Width: | 10mm/0.4" (IP20/65), 12mm/0.47" (IP67/68) |
| Length: | 5m, 16.4-ft reel |
| Height: | 2.2mm (IP20), 3-4mm (IP65), 6mm (IP67/68) |
| LED Quantity: | 60 LEDs/m, 300 LEDs reel |
| Cuttable: |
DC12V - 3 LEDs, 50mm/2" DC24V - 6 LEDs, 100mm/4" |
|
Waterproof Rating:
|
Non-waterproof IP20, Waterproof IP65 IP67 IP68
|
| Connector: | 4-pin power cord at both sides |
| Connector Length: | 10-15cm (4"-6") |
| Installation: | Adhesive backing |
| Solder Joints: | 12V+/24V+, R (850nm light), G (660nm light), B (660nm light) |
| Beam Angle: | 120° |
12V version also available in US Amazon Platform
