| Select Connector Type: | 1*Strip to Wire Connector Only (Base), 1*Strip to Strip Connector Only (Base), 1*Strip to Wire Connector With Cable, 2*Strip to Wire Connector With Cable |
|---|---|
| Select PCB Width: | 8mm (0.31in) (Base), 10mm (0.39in) (Base), 12mm (0.47in) (Base) |
| Availability | In Stock |
| Condition | Brand New |
For 3-wire COB strip lighting applications that require cutting, the use of connectors is an accessible way to achieve a quick installation that doesn't require soldering or complicated maneuvers. Two types of connectors, board-to-board and board-to-wire, are provided here to address different COB connection needs.
• Board-to-board: for connecting multiple sections of 3-pin cob light strips.
• Board-to-wire: for electrical input or control signal transmission of the cob strip.
Insert the cob light tape strip or wires into the connector and align the copper tabs with the solder joints on the strip PCB, use pliers to press down the copper tabs.
Specifications
Product: 3 Pin Press Fit Piercing Connectors For COB
Type: PCB-to-PCB, PCB-to-Wire
Apply to: Cob LED strips
Material: Plastic + Mental
PCB Width: 8mm/0.3", 10mm/0.4", 12mm/0.47"
Cable Length: 10cm-15cm (4"-6")