| Select Kit: | LED Strips (Base), LED Strips + Controller + Power Supply |
|---|---|
| Select Length: | 16.4ft (5 meters) (Base) |
| Select Waterproof Rating: | Non-Waterproof IP20 - Adhesive Back (Base), Surface Glued IP65 - Adhesive Back, Underwater IP68 - Adhesive Back, Outdoor Silicone Tube IP67 - Adhesive Back |
| Availability | In Stock |
| Condition | Brand New |
Customized for your Addressable Lighting Project
As a leading wholesale addressable led strip supplier, this 8mm addressable rgb 120 LED/m high density tape strip is designed to meet customer requirements for programmable projects with low energy consumption, signal stability and light uniformity. Powered by 24V, the TM1934 4-wire digital led strip can easily cope with phantom RGB lighting over a distance of up to 10 meters, with 10.8 watts per meter low electricity consumption to achieve high brightness output, energy efficient in the long run, making your investment worthwhile. The breakpoint transmission technology protects your lighting system, even if individual LEDs fail, the whole 8mm digital tape will still work normally, so that your project will always be brilliant. Pair it with a waterproof silicone led channel compatible with 8mm PCB to achieve spotless illumination for outdoor use.
Product Specifications
| LED Strip Type: | High Density 120 LED/m RGB Digital LED Tape |
| LED Chip: | TM1934 + SMD2835 |
| Input Voltage: | DC24V |
| Power: | 10.8W/m, 3.3W/ft, 54W/Reel |
| LED Color: | RGB |
|
PCB Width:
|
IP20/65 8mm/0.3", IP67/68 10mm/0.4",
|
| LED Quantity: | 120 LEDs/m |
| IC Quantity: | 20 IC/meter (1 IC drives 6 leds), 100/Reel |
| Cuttable: | 6-LED, 50mm/1.97" |
| Length: | 5m 16.4ft |
| Connector: | 4pin JST male and female connectors |
| Pins: | Positive, data, backup data, nagetive |
| Gray Scale: | 256 |
| Waterproof Rating: | Non-waterproof IP20 / Indoor waterproof IP65 / Outdoor Waterproof IP67 IP68 |
| Working Temperature: | -20℃ ~ +45℃ |
| Beam Angle: | 120° |
4 Pin TM1934 RGB LED Strip Wiring
Connect "24V+" wire of the strip to "VCC" port of the X7 WiFi SPI controller (controller in the kit), data wire "Di/Do" to "DAT" port, backup date wire "Fi/Fo" to "DAT" or "GND" port, "GND" wire to "GND" port. Then power the controller and digital tape with DC 24V power supply like LRS-100-24 in the kit.
