| Select Kit: | LED Strips (Base), LED Strips + Controller + Power Supply, LED Strips + Controller + Remote + Power |
|---|---|
| Select Length: | 16.4ft (5 meters) (Base) |
| Select PCB Width: | 10mm (0.39in) (Base) |
| Select Waterproof Rating: | Non-Waterproof IP20 - Adhesive Back (Base), Underwater IP68 - Adhesive Back, Outdoor Silicone Tube IP67 - Adhesive Back |
| Availability | In Stock |
| Condition | Brand New |
COB kelvin color temperature tuning LED strip lights ushering in a new design for 2025, SuperLightingLED has increased the number of light chips on board to a tightly packed 840 beads per meter (256 per foot). This innovation not only significantly increases the brightness of the cob lights, but also results in finer light distribution and more even illumination. More chips on the strip represent higher brightness visible to the naked eye, bringing a comfortable variation of warm and cool tones to your bedroom and home space.
Normally the solder joints of light strips are designed to be visible on the PCB board, this bright CCT light strip hides the solder joints on the backside, leaving only the necessary LED devices on the surface to stabilize the operation. This design enhances the aesthetics of the led strip and also reduces the scattering and reflection of light, minimizing possible failures due to exposed solder joints.
Use smart PW2 wireless controller, C3 CCT remote, and LRS-150-24 power supply to drive the 24V DC cob lights led tunable white strip.
|
Warm Notice For Used With Aluminum Profiles: Since the solder joints of this light strip are located on the back of the PCB, after soldering the light strip, the solder joints must not come into direct contact with the aluminum profile, as this could cause LED short circuits. Therefore, please cover the solder joints with an insulating film to ensure normal LED operation. If you have any suggestions or feedback regarding this design in practical applications, please feel free to share them with us. |
• 2700K and 6500K LED chips are covered by high translucent silicone for high light quality
• 10mm wide gold-plated electrolytic circuit board, oxidation resistance, high temperature resistance
• Extremely high flexibility to resist PCB rupture in bending process
• 180 degree light-emitting angle, light efficiency up to 1500-1700LM/M, 100-120LM/W
• 24V low voltage drive, 20W per meter (6.1W per foot) power consumption
• Cutting lines are visible on the cob strip and can be cut every 50mm (1.97in)
| LED Strip Type: | COB Bright CCT Warm Cool Color Tuning LED Strip Aesthetics |
| Beam Angle: | 180° |
| Input Voltage: | DC24V |
| Power: | 20W/m, 6.1W/ft, 100W/roll max |
| LED Color: | Tunable White, 2700-6500 Kelvin color temp |
| PCB Width: | 10mm/0.4" for IP20, 12mm/0.47" for IP67 and IP68 |
| LED Quantity: | 840 Chips/m, 256 Chips/ft, 4200 Chips/roll |
| Length: | 5m/16.4ft |
| Cuttable: | 50mm/1.97" |
| Waterproof Rating: | Non-waterproof IP20, Waterproof IP67, Underwater IP68 |
| CRI: | Ra 90+ (High) |
| Lumen: | 1500-1700lm/m, 100-120lm/W |
| Outlet Cable: | 3-pin wires at both ends |
