| Select Connector Type: | 1*Strip to Wire Connector With Cable (Base) |
|---|---|
| Select PCB Width: | 12mm (0.47in) (Base) |
| Availability | In Stock |
| Condition | Brand New |
This waterproof LED strip-to-wire quick connector cable is a connection device designed for 6-pin SMD outdoor RGBWW strip lights, it can quickly and easily realize the electrical connection of waterproof 12mm-pcb RGBCCT strip light after cutting, while maintaining good waterproof performance.
The LED connection portion of this 6-wire electric cable connector waterproof pierces the PCB directly from the back of the waterproof RGBCCT strip through the built-in sharp pin, no need to peel off the silicone waterproof layer of the IP67 or IP68 strip, and no need to solder.
With the push-to-puncture design, the cut 6-pin strip is placed into the connector's transparent frame component, and then the transparent frame is pressed onto the pin base to establish an electrical connection. There is a hole in the clear frame where the RGBCW led strip is punctured, allowing you to inject glue through it to continue to maintain the waterproof rating of the connection.
The other end of the connecting fitting is a 6-pole cable that connects to the RGBCCT controller or driver.
Please note that this 6-pin waterproof cable connector is for 12mm smd PCB, the waterproof strip width of 12mm PCB is about 14mm.
Type: 6 Pin Electrical Waterproof Connector Cable
Material: Plastic + Metal Pins
Connection: Strip to Wire (Click here for strip-to-strip type)
Length: 200mm/7.87in
Max Current: 6A
Pins: 6 (only for SMD led strip)
Apply to: 6-Wire Waterproof SMD RGBWW Led Strips
Compatible: IP67 and IP68 Silicone-Coated Tape Lights
PCB Width: 12mm (waterproof width 14mm)
