| Select Connector: | 2-Pin (V+, GND) (Base), DC Female Connector (Black), 2-Pin Wire + DC Female Connector (Black) (Base) |
|---|---|
| Select Kit: | LED Strip + LRS-150 Power Supply, LED Strip Only (Base) |
| Select LED Quantity: | 240 LEDs/m (Base) |
| Select Length: | 16.4ft (5 meters) (Base) |
| Select Operating Voltage: | 12VDC (Base), 24VDC (Base) |
| Select Waterproof Rating: | Non-Waterproof IP20 - Adhesive Back (Base), Surface Glued IP65 - Adhesive Back, Underwater IP68 - Adhesive Back, Waterproof IP67 - Adhesive Back |
| Wavelength: | 730nm (7 Days) (Base), 730nm (1-3 Days) |
| Availability | In Stock |
| Condition | Brand New |
Stop wasting time waiting for your plants to flip—transition from vegetative to flowering states faster than ever while maximizing photosynthetic efficiency. Most growers struggle with uneven light distribution and "stalled" flowering cycles; our FSLIR-240-2835-730NM Far-Red LED Flex Strip solves this by providing a seamless, shadow-free 730nm "End-of-Day" signal and a powerful Emerson Effect boost.
The form of LED light strip allows you to integrate 730nm far-red with your existing 660nm deep-red spectrum and trigger a biological synergy. The photosynthetic rate of the two combined is greater than the sum of the parts. This enables thicker stalks, larger leaves, and more robust biomass.
730nm mimics the spectrum of the setting sun. Using this strip for some times at the end of your light cycle rapidly converts Phytochromes from active form to inactive form. This "tricks" the plant into sleeping faster, allowing you to shorten the night period or simply trigger the flowering stage much more aggressively.
The images show what the highest-density 2835 LED 730nm light strip (7-day version) looks like.
• 240 LEDs/m unmatched uniformity, your plants receive perfectly even 730nm coverage.
• With cut points every 12.5mm or 25mm, you can fit this 730nm tape into any custom greenhouse rack or DIY fixture without "dead zones."
• Slim 8mm FPCB, fits into standard aluminum profiles or tight corners between existing grow lights.
• Available from IP20 for dry rooms to IP68 for high-humidity hydroponic environments.
Due to the specific wavelengths used by LEDs, light strips generate heat. It is recommended to install them in well-ventilated areas or mount them using aluminum profiles.
| LED Type: | Special Wavelength Lighting Systems |
| Item: | Ultimate Uniform 730nm Far Red LED Flex Light Strip |
| LED Quantity: | 240LEDs/m, 73LEDs/ft, 1200LEDs/reel |
| LED Chip: | SMD2835 |
| Input Voltage: | DC12V, DC24V |
|
Power:
|
90W/roll max, 18W/m, 5.5W/ft
|
| Light Wavelength: | 730 nanometers |
|
Dimensions:
|
W8mm"*H2mm (IP20),
W8mm*H3mm (IP65),
W10mm*H6mm (IP67 and IP68)
|
| Length: | 5m/16.4ft |
| LED Color: | Visible dark red |
|
Cuttable:
|
DC12V - 3 LEDs, 12.5mm/0.49",
DC24V - 6 LEDs, 25mm/0.98"
|
| Connector: | 2-pin power cord or DC female connector |
| Connector Length: | 10-15cm (4"-6") |
| Installation: | Self-adhesive |
| Beam Angle: | 120° |
Cannabis & High-Value Floriculture: Speed up flowering cycles and increase terpene/oil production.
Vertical Farming: Compact solution for multi-tier shelving.
Supplemental Greenhouse Lighting: Fill in the spectral gaps during winter months.
Research & Lab Grade Growth: Precision control over plant morphology and photoperiodism.