Go to Top
SuperLightingLED
SUPERLIGHTINGLED CO., LTD
Web: www.superlightingled.com
Email: [email protected]
Date: 2026-11-03 | ID: 7168

4-Pin SMD Water Resistant RGB LED Light Strip IP68 Connector

MODEL: WPACC-SMD-BTB-4P
Price based on selections below:
$1.50
Select PCB Width:10mm (0.39in) (Base), 12mm (0.47in) (Base)
AvailabilityIn Stock
ConditionBrand New
Technical Specifications

Create seamless, reliable connections between waterproof RGB LED strips without any soldering. The WPACC-SMD-BTB-4P is a professional-grade, water resistant led strip connector designed for speed and durability. Its piercing mechanism securely connects two sections of 4-pin, 10mm or 12mm LED tape, maintaining a strong electrical bond. Ideal for extending runs, or repairing sections in outdoor and damp environments.

These strip to strip led solderless conectors are engineered to handle up to 6A of current, making them suitable for lighting projects up to 10 meters long. Simplify your installation process and achieve a clean, professional finish with this essential accessory for any lighting professional or DIY enthusiast.

Technical Highlights

  • **Piercing Contact Technology:** Four sharp copper pins simultaneously pierce the LED strip from the back, establishing a secure electrical and mechanical connection without stripping silicone.
  • **Wide Compatibility:** A single connector fits both 10mm and 12mm wide 4-pin RGB LED strips, reducing the need to stock multiple connector sizes.
  • **6A Current Rating:** Capable of handling up to 144W at 24V, suitable for connecting substantial lengths of high-density RGB LED strips.
  • **Fire-Retardant PC Material:** Constructed from high-quality, fire-retardant polycarbonate for enhanced safety and durability in various environments.

Product Specifications

Parameter Details
Product Model WPACC-SMD-BTB-4P
Connector Type Strip-to-Strip, Solderless
Number of Pins 4
Compatible PCB Width 10mm, 12mm
Compatible Strip Type Waterproof IP67 / IP68 (Silicone Coated) 4-Pin LED Strips
Maximum Current 6A
Housing Material Polycarbonate (PC), Fire-retardant
Contact Material Copper

Installation Guide

  1. Ensure the power is disconnected. Cut your waterproof LED strip cleanly along the designated cut line.
  2. Insert the ends of the two LED strips you wish to join into the transparent part.
  3. Carefully align the '+' marking on the LED strips with the '+' marking indicated on the connector base for both strips.
  4. Place the transparent cover, with the holes facing down, onto the connector base, ensuring it is properly seated.
  5. Using pliers or firm finger pressure, press the transparent cover down evenly and forcefully. You should feel a distinct click as the pins pierce the PCB.
  6. Tug gently on both strips to confirm a secure mechanical connection. Connect to power to test the electrical connection before final installation.
⚠ Warnings:
  • Always disconnect power before installation or modification.
  • Ensure correct polarity alignment ('+' to '+'). Incorrect wiring can damage your LED strips.
  • This connector is designed for waterproof LED light strips with a silicone coating. It may not work with non-waterproof (IP20) strips.
  • Do not exceed the 6A maximum current rating.
  • While designed for waterproof LED strips, the connector itself should be protected from direct water immersion. Use silicone glue or heat shrink tubing for fully waterproof seals.

⚠ Precautions

  • Verify your LED strip is 4-pin and either 10mm or 12mm wide (PCB) before purchase.
  • Apply firm, even pressure during installation to ensure all pins make proper contact.
  • For outdoor use, it is recommended to seal the connector with waterproof silicone or heat shrink tubing for maximum longevity.

Frequently Asked Questions

Q: Can I use this connector with non-waterproof (IP20) LED strips?

A:This connector is specifically designed for waterproof strips with a silicone coating. The piercing pins may damage the circuit board of a non-waterproof strip and are not recommended for that application.

Q: Is the connector itself waterproof after installation?

A:The connector creates a water-resistant seal suitable for damp locations. For applications with direct water exposure or submersion, we strongly recommend sealing the connector with silicone adhesive and heat-shrink tubing for an IP67 or higher rating.

Q: Will this work for 5-pin RGBW or 2-pin single color strips?

A:No, this connector is designed exclusively for 4-pin (R, G, B, +) LED strips. You will need a different connector model for strips with a different pin count.

Q: What tools are required for installation?

A:No special tools are required, but a pair of pliers can be helpful to apply firm, even pressure to close the connector and ensure the pins pierce the strip correctly.

Q: How do I ensure I've aligned the polarity correctly?

A:Both the connector and your LED strip should have a '+' mark indicating the positive line. Simply ensure the '+' on the strip aligns with the '+' on the connector for both ends being joined.

Q: What is the maximum current this connector can handle?

A:This connector is rated for a maximum of 6 Amps. Please check your LED strip's power consumption to ensure your total current does not exceed this limit.

© 2026 SuperLightingLED. All specifications are subject to change without notice.