Can this LED strip be cut to a custom length?

Yes, this LED strip can be cut every 12 LEDs, which is approximately every 90.9mm (3.58 inches), at the designated copper solder pads.

Is this LED strip waterproof for outdoor or bathroom use?

No, this specific model is IP20 rated, which means it is non-waterproof and designed for indoor use in dry locations only. Do not expose it to moisture.

What is the maximum length I can run in a single continuous strip?

The maximum recommended length for a single run is 5 meters (16.4ft) to avoid voltage drop, which can cause dimming at the far end of the strip. For longer installations, you should run parallel strips from the power supply or power the strip from both ends.

Spec Sheet - CCT-2835-2IN1-132W8

Select Length:	16.4ft (5 meters) (Base)
Select Light Color :	Warm White(2700K) + Daylight White(6500K) (Base)
Select Waterproof Rating:	Non-Waterproof IP20 - Adhesive Back (Base), Outdoor Silicone Tube IP67 - Adhesive Back
Availability	In Stock
Condition	Brand New

This 24V Tunable White LED Strip Light offers exceptional control over your lighting environment, allowing seamless adjustment from a cozy 2700K warm white to a crisp 6500K cool white. Featuring a high density of 132 SMD 2835 LEDs per meter on a narrow 8mm PCB, it produces a smooth, uniform line of light with minimal spotting, making it ideal for installations where the strip itself may be visible.

This product is designed for professionals seeking precise color temperature control. It's perfect for creating both functional task lighting and cozy ambient scenes. Each unit is a single 5-meter (16.4ft) roll, providing ample length for significant projects.

Key Features

Dynamic CCT Adjustment

Smoothly transition between 2700K warm white and 6500K cool white to match the mood or time of day.

High-Density & Uniform Light

With 132 LEDs per meter, this strip light minimizes hotspots for a clean, continuous line of light.

Narrow 8mm PCB

The slim 8mm width allows for installation in tight spaces and low-profile aluminum channels.

Efficient 24V DC Power

Operates on 24V for longer maximum run lengths with less voltage drop compared to 12V systems.

Cuttable for Custom Lengths

Can be cut at marked intervals to perfectly fit the length of your project requirements.

Simple Installation

Features an adhesive backing for a secure peel-and-stick installation on clean, dry surfaces.

Technical Highlights

2-in-1 SMD 2835 Chip: Each LED chip contains both a warm white and a cool white diode, enabling superior color mixing and a more consistent light output across the CCT range.
3-Wire Design: Utilizes a common anode (+24V) and separate channels for warm white (WW) and cool white (CW), ensuring compatibility with a wide range of CCT controllers.
High Efficacy: Delivers up to 1980 lumens per meter while consuming only 24 watts, providing a balance of high brightness and energy efficiency.

Product Specifications

Parameter	Details
Product Model	FSLSR-24V-2700-2835
Input Voltage	DC 24V
Power Consumption	24 W/meter (7.3 W/ft)
Total Power (5m Roll)	120 Watts
Color Temperature (CCT)	Tunable 2700K to 6500K
Luminous Flux	Approx. 1980 lm/meter (603 lm/ft)
Total Luminous Flux (5m Roll)	Approx. 9900 lumens
Color Rendering Index (CRI)	Ra > 80
LED Type	SMD 2835
LED Quantity	132 LEDs/meter
Beam Angle	120°
PCB Width	8mm
PCB Color	White
Reel Length	5 meters (16.4 feet)
Cut Interval	Every 45.45mm/1.79in (6 LEDs)
IP Rating	IP20 (Non-Waterproof), IP67 (Silicone Housing)
Dimming	Yes, with a 3-wire CCT controller

Application Scenarios

Circadian Rhythm & Wellness Lighting Install in homes, offices, or healthcare facilities to create human-centric lighting. Use a programmable controller to automatically adjust the tunable white LED strip from energizing cool light during the day to relaxing warm light in the evening.

Kitchen Under-Cabinet Lighting Achieve perfect task lighting for food preparation with bright, cool white light. In the evening, dim and shift the color to a warm, ambient glow for a completely different kitchen atmosphere.

Architectural Cove & Soffit Lighting Use this high-density LED strip light in coves, valances, and soffits to provide beautiful, indirect illumination. The ability to change from warm to cool white allows you to alter the entire mood of a room with the touch of a button.

How to Install & Use This LED Strip

1. Surface Preparation: Thoroughly clean the mounting surface with isopropyl alcohol to remove any dust, oil, or residue. Ensure the surface is completely dry before proceeding.
2. Measure and Cut: Measure the required length and cut the LED strip only on the designated copper cut marks. Cutting anywhere else will damage the circuit.
3. Connect to Controller & Power: Connect the 3 wires from the LED strip to a compatible CCT controller (+24V, WW, CW). Then, connect the controller to a 24V DC power supply.
4. Pre-Installation Test: Before peeling the adhesive backing, power on the strip to test its functionality. Verify that you can control both brightness and the full range of color temperatures.
5. Peel and Stick: Carefully peel the protective layer off the 3M adhesive backing. Firmly press the LED strip onto the prepared surface, holding for 15-30 seconds to ensure a strong bond.

⚠ Precautions

Ensure your 24V DC power supply has at least 20% wattage overhead. For a full 5m roll (120W), a power supply of 144W or greater is required.
Do not exceed the maximum run length of 5 meters in a single series. For longer runs, power the strip from both ends or run parallel power feeds to prevent voltage drop.

What's in the Box

✓1 x 5-meter (16.4ft) Roll of Tunable White LED Strip Light

Frequently Asked Questions

Q: Is this LED strip dimmable?

A:Yes, it is fully dimmable. However, you must use a compatible CCT (Correlated Color Temperature) controller or dimmer. It is not dimmable with standard single-color or AC dimmers.

Q: What kind of power supply do I need for a full 5-meter roll?

A:The full 5-meter roll consumes 120 Watts (24W/m x 5m). We recommend a 24V DC power supply with a capacity of at least 144 Watts (120W x 1.2) to ensure stable performance and longevity. For the full 5-meter roll, we recommend a high-quality 24V power supply with at least 144W, like our MeanWell UL indoor power supplies.

Q: How do I control the color temperature and brightness?

A:You need a 3-channel (V+, WW, CW) CCT LED controller. It is fully dimmable when paired with appropriate dual white CCT LED dimmers, which will allow you to adjust both the brightness level and the color temperature from warm white to cool white.

Q: Why choose an 8mm PCB width?

A:The narrower 8mm PCB is advantageous for fitting into slim, low-profile aluminum extrusion channels or tight architectural spaces where standard 10mm or 12mm strips are too wide.

8mm 24V 2835 2-in-1 Dual Temp White LED Strip Light 132 LEDs Per Meter