Go to Top
SuperLightingLED
SUPERLIGHTINGLED CO., LTD
Web: www.superlightingled.com
Email: [email protected]
Date: 2026-10-29 | ID: 7315

WS2815 Individually Addressable Outdoor LED Strip 5050 RGB Solid Silicone Waterproof IP68 12V

MODEL: IP68-WS2815-5050RGB-60
Price based on selections below:
$42.98
Select Connector Type:JST Fast Connectors (Base), Waterproof Fast Connectors
Select LED Quantity:60 LEDs/m (Base)
Select Length:16.4ft (5 meters) (Base)
Select Waterproof Rating:Underwater IP68 - Adhesive Back (Base)
Select Wire Outlet:Only Input (Base), Input + Output (Base)
AvailabilityIn Stock
ConditionBrand New
Technical Specifications

This 12V individually addressable outdoor LED strip combines WS2815 integrated SMD5050 RGB LEDs with an IP68 solid silicone extrusion body for exterior and shallow water installations. Each LED functions as an independent pixel, allowing dynamic color-chasing sequences, programmable pixel mapping, and fluid ambient effects across patios, decks, architectural perimeters, and fountain basins. 

The integrated WS2815 IC driver features dual-signal data transmission, meaning a single damaged LED will not disrupt signal continuity to the remaining run. Every 5m reel includes pre-applied red adhesive tape and 4-pin connection leads for dependable field deployment.

Core Technical Advantages

IP68 Solid Silicone Encapsulation

Entire circuit board, solder pads, and SMD components are completely encased in solid silicone extrusion measuring 12mm wide by 5mm high for continuous moisture protection in wet zones and shallow submerged projects.

WS2815 Dual-Signal Backup Line

Engineered with data (DI) and backup data (BI) traces so an individual broken component does not interrupt signal transmission down the remaining WS2815 programmable LED strip lights line.

Individual Pixel Control at 12V DC

Operates on 12V direct current while maintaining true single-LED cuttable resolution (1 LED = 1 pixel), reducing voltage drop across long runs compared to 5V digital ribbon alternatives.

Pre-Applied Red Adhesive Backing

Features high-tack red adhesive along the entire 5-meter base for initial positioning, supported by optional screw-mount silicone clips for permanent outdoor mounting.

Flexible Lead and Connector Options

Supplied standard with 4-pin JST-SM connectors, with factory options for black threaded waterproof mating plugs as well as single-ended or dual-ended wire lead configurations.

Engineering and Durability Specifications

  • 60 independently controlled SMD5050 RGB LEDs per meter provide uniform pixel density across architectural accents and IP68 LED strip lights for swimming pools edge applications.
  • Cut lines placed between every single LED at 16.6mm intervals permit precise on-site length customization for custom joinery and deck risers.
  • Dual-trace signal architecture ensures uninterrupted operation in commercial landscape projects where physical maintenance access is limited.

Detailed Technical Specifications

ParameterDetails
Product Model SKUIP68-WS2815-5050RGB-60
Operating Voltage12V DC
LED Chip TypeSMD 5050 RGB
LED Density60 LEDs per meter (300 LEDs per 5m reel)
Pixel Resolution1 LED = 1 Individual Pixel (Individually Addressable)
Integrated Circuit (IC)WS2815 (Internal to 5050 package, Dual Signal Line)
Power Consumption14.4W per meter (72W per 5m reel)
Reel Length5 meters (16.4 feet)
PCB Dimensions12mm width x 5mm height
PCB ColorWhite PCB
Waterproof RatingIP68 Solid Silicone Encapsulation
Beam Angle120 degrees
Cut Interval16.6mm (every 1 LED)
Default Connector Type4-Pin JST-SM (Male and Female)
Optional ConnectorBlack Waterproof Screw-Lock Connector
Lead ConfigurationSingle-ended output or dual-ended output available
Adhesive TypeRed high-bond double-sided backing tape
Operating Temperature-20℃ to +50℃

Target Installation Scenarios

Poolside Deck and Patio Perimeter Lighting Run this individually addressable outdoor LED strip along patio perimeter channels, step treads, and pool coping edges. The solid silicone jacket withstands foot splashes and rain exposure while pairing with waterproof outdoor LED controllers to generate smooth color gradient sweeps.
Shallow Water Fountains and Garden Ponds Submerge this addressable led strip light outdoor inside shallow fountain basins and decorative ponds. The IP68 solid silicone casing provides total moisture barrier protection without the internal water pooling risks found in hollow sleeve strips.
Architectural Facade and Outdoor Landscape Accents Mount along exterior columns, soffits, and commercial signage. Using a dedicated 12V waterproof power supply, lighting designers can map custom pixel animations, holiday patterns, and building outline lighting that runs reliably in cold and wet seasons.

How to Install & Use This LED Strip

  1. Inspect the LED strip on the reel and connect temporarily to a 12V DC power source and SPI controller to test full RGB color cycles before deployment.
  2. Clean mounting surfaces with isopropyl alcohol to remove grease, dirt, and moisture before applying the adhesive backing.
  3. If custom sizing is required, cut only along the indicated copper pad lines between individual LEDs using a sharp blade.
  4. Seal cut ends thoroughly using neutral-cure silicone sealant and matching silicone end caps, allowing a 24-hour curing window before water exposure.
  5. Peel the red release liner, press the LED strip firmly onto the mounting channel for 30 seconds, and install silicone mounting clips every 30 to 50cm for permanent mechanical retention.
  6. Wire power positive (+12V) and ground (GND) directly to the power supply terminals; attach data (DI) and backup data (BI) to your controller output.
WS2815 LED Strip Wiring Diagram

⚠ Precautions

  • Keep main wire splices, power supply units, and non-waterproof JST connectors housed in dry enclosures or weather-sealed junction boxes away from standing moisture.
  • Do not exceed a 5-meter continuous series run from a single power feed; inject 12V DC power at both ends of runs longer than 5 meters to prevent voltage drop and color shifting.
  • Select a power supply rated at least 20% higher than the combined wattage of your LED strip run (minimum 90W driver for one 72W 5m reel).

What's in the Box

  • ✓1 x 5-Meter Reel IP68 12V WS2815 60 LEDs/m Solid Silicone RGB LED Strip
  • ✓1 or 2 x Pre-Attached 4-Pin Connector

Frequently Asked Questions

Q: how to program addressable led strip

A:Program patterns using digital lighting controllers running WLED, Madrix, xLights, or Arduino FastLED libraries by selecting the WS2815 or WS2811/WS2812B protocol configuration at 800kHz.

Q: Where should the wire connection points be positioned for underwater installations?

A:The strip body itself is rated for shallow water immersion, but wire connections and JST-SM connectors should always be routed to dry junction boxes or moisture-free locations above the water line.

© 2026 SuperLightingLED. All specifications are subject to change without notice.