| Select Aluminum Profile: | MS-9036 (64*64mm) (Base), MS-8837 (62*62mm) - Only Black (Base) |
|---|---|
| Select Channel Color: | White (Base), Black (Base) |
| Select Diffuser: | PC opal diffuser (Base) |
| Select Length: | 3.28ft (1 meter) (Base), 6.56ft (2 meters), 8ft (2.44 meters), 20cm (7.87in) Sample |
| Availability | In Stock |
| Condition | Brand New |
The ALU-CM-CORNER-1 series brings direct linear architectural illumination to ceiling top corners without needing recessed drywall pockets. Engineered specifically as a corner ceiling light extrusion, this heavy-duty aluminum alloy corner light cornice fastens directly into the 90-degree intersection where wall meets ceiling using direct screw fastening. The extrusion occupies 62mm or 64mm along both ceiling and wall planes, projecting an expansive linear lighting cornice with visible luminous widths reaching up to 90mm across the optical diagonal.
Designed with an internal channel width of 15mm (MS-8837) or 19.5mm (MS-9036), it comfortably houses 12mm to 15mm wide continuous LED tape lines. The internal angled sidewalls bounce diode emissions through a PC opal diffuser to eliminate hot spots.
Secures directly to the junction between ceiling and vertical wall surfaces using mechanical screws, requiring zero mud-in or drywall cutting.
Occupies 62x62mm (MS-8837) or 64x64mm (MS-9036) along each corner face to establish a bold, modern perimeter cornice trim.
Projects a wide, uniform band of light across the diagonal aperture, dispersing beam output downward into rooms with ceiling heights above 2.7m.
Accommodates high-output single color LED strip lights, dual-row diodes, or wide multi-conductor tape formats up to 15mm wide.
Saturates diode output evenly across the entire lens surface to achieve completely dotless linear illumination.
Provides solid structural rigidity and functions as a continuous thermal heat sink for high-wattage LED tape lights.
| Parameter | Details |
|---|---|
| Model Number | ALU-CM-CORNER-1 |
| Product Type | Ceiling Top Corner Linear LED Cornice Profile |
| Material | Extruded 6063-T5 Aluminum Alloy |
| Profile Choice MS-9036 | W64mm x H64mm (2.52in x 2.52in) |
| Profile Choice MS-8837 | W62mm x H62mm (2.44in x 2.44in) (Black Only) |
| Inner Width (MS-9036) | 19.5mm (0.77in) |
| Inner Width (MS-8837) | 15.0mm (0.59in) |
| Supported LED Strip Width | 8mm, 10mm, 12mm, up to 15mm |
| Diffuser Material | PC opal diffuser |
| Diffuser Light Transmission | 78% to 82% dotless output |
| Visible Luminous Surface | Approx. 85mm to 90mm diagonal exposure |
| Channel Color Options | White, Black |
| Length Options | 20cm (sample), 1m (3.28ft), 2m (6.56ft), 2.44m (8ft) |
| Mounting Method | Direct surface corner screw fastening |
| Included Hardware per Segment | 1x Aluminum Channel, 1x PC Opal Diffuser, 2x End Caps |
Q: how to stick led lights on ceiling without them sagging?
A:Sticking bare LED tape directly to drywall paint often leads to tape peeling within months due to dust and heat cycling. Mounting your tape inside this screw-secured aluminum channel provides an engineered, clean surface that holds tape flat permanently while cooling the diodes.
Q: how to instal aluminum led channel in a ceiling corner?
A:Pre-drill counter-sunk holes along the mounting face, align the profile flush into the junction of the ceiling and wall, and drive screws into studs or drywall anchors. Once anchored, stick your LED tape inside, solder or clip leads, and snap the PC diffuser into place.
Q: What is the difference between profile models MS-9036 and MS-8837?
A:Model MS-9036 measures 64x64mm with an internal width of 19.5mm, available in both black and white finishes. Model MS-8837 measures 62x62mm with a 15mm inner width and comes exclusively in black finish.
Q: Does this corner profile eliminate diode spotting completely?
A:Yes. With a deep interior depth and an opal PC diffuser spanning an aperture up to 90mm wide, any LED strip featuring at least 60 LEDs per meter or any continuous COB LED strip creates an uninterrupted, dotless light beam.