Spec Sheet - C1+P1

Availability	In Stock
Condition	Brand New

The C1+P1 single color LED dimmer kit delivers smooth dimming management for low-voltage constant voltage installations. Operating across a wide 12-48Vdc input and output range, the P1 receiver handles up to 11A maximum load current, delivering up to 384W of power output at 48V (132W at 12V, 240W at 24V, and 288W at 36V). The handheld C1 wireless remote pairs over an interference-resistant 2.4GHz RF frequency and features a touch slider, dedicated on/off controls, 11 discrete brightness stepping levels, continuous press-and-hold dimming, and two programmable scene presets. Engineered with a Covestro/Samsung V0 flame-retardant PC housing and comprehensive electronic safeguards (OCP, OTP, SCP, and RCP), this single-zone kit also integrates onboard Push DIM terminals for flexible wired wall-switch dimming alongside wireless remote operation.

C1+P1 Product Datasheet (PDF)

Key Features

Wide 12-48Vdc Voltage Range

Supports 12V, 24V, 36V, and 48V constant voltage LED strip lighting setups with up to 11A total output capacity.

Dual Dimming Control Modes

Features a touch slider for rapid level selection, 11 quick-step brightness increments, and continuous press-and-hold dimming.

Integrated Push DIM Terminals

Includes dedicated Push DIM wired terminals on the receiver to enable optional momentary wall-switch dimming.

Programmable Scene Memories

Store and recall up to 2 customized lighting brightness scenes directly from the handheld remote control.

Multi-Unit Flexible Pairing

A single P1 controller pairs with up to 10 remotes, while one C1 remote can simultaneously control multiple synchronized receivers.

Robust Hardware Protection

V0-rated flame-retardant PC enclosure equipped with over-current, over-temperature, short-circuit, and reverse-polarity protections.

Technical Highlights

Soft-start gradual dimming ramp ensures high visual comfort without abrupt switching shock.
Magnetic wall-mount bracket allows convenient docking and undocking of the handheld C1 remote.
Ultra-low standby power consumption (< 5uA) on the remote control, extending battery operational life.
Automatic sleep mode activates after 6 seconds of remote inactivity to preserve AAA battery power.
Remote-to-remote code replication allows instant duplication of settings across identical model remotes.
Receiver cut-out dimension profile (diameter 43-45mm) fits standard mounting cavities.

Product Specifications

Parameter	Details
Model / SKU	C1+P1
Kit Components	C1 Remote Control + P1 Controller
Dimming Type	DIM (Single Color)
Input Voltage	12-48Vdc
Output Voltage	12-48Vdc
Output Channels	1 Channel
Max Load Current	11A Max
Load Power Ratings	132W @ 12V, 240W @ 24V, 288W @ 36V, 384W @ 48V
Wireless Frequency	RF 2.4GHz
Remote Power Supply	3Vdc (2 × AAA batteries, not included)
Remote Standby Current	< 5uA
Auxiliary Control Interface	Push DIM (2 screw terminals)
Hardware Protections	OCP, OTP, SCP, RCP (Over-Current, Over-Temp, Short-Circuit, Reverse-Polarity)
Housing Material	Covestro / Samsung V0 Flame-Retardant PC
Operating Temperature	-25℃ to +50℃
Controller Dimensions	L91 × W37 × H21 mm
Mounting Cutout Dimensions	Diameter 43-45 mm
Remote Dimensions	L150 × W48 × H15.5 mm
Magnetic Mount Dimensions	L85 × W35 × H20 mm
Product Net Weights	Controller: 46g ± 5g; Remote: 62g; Mount: 12g
Manufacturer Warranty	5 years from date of delivery (manufacturer terms)

Application Scenarios

Residential Cove and Under-Cabinet Dimming Seamlessly regulate single color LED strip lighting in living rooms, kitchens, and architectural coves using tactile touch slider controls or magnetic wall-mounted docking.

Commercial Display and Showcase Lighting Fine-tune product presentation luminance across retail display vitrines and shelving using preset scene recall buttons to maintain standardized lighting levels.

Architectural Millwork and Joinery Lighting Integrate compact P1 controllers inside furniture voids or millwork junction boxes thanks to the slim 91mm footprint and low-profile cutout compatibility.

Hospitality Corridor and Accent Lighting Deploy synchronized multi-controller setups throughout hotel hallways or lounge perimeters driven by a single wireless RF remote or momentary Push DIM wall switches.

48V Single Color Installations Capitalize on the full 48Vdc input ceiling to power long-run commercial single color LED strip configurations up to 384W.

How to Control & Use This Controller

Disconnect primary AC mains power to your external DC power supply before making any electrical connections.
Connect the 12-48Vdc power supply positive and negative leads to the P1 controller input (+, -) screw terminals.
Connect the single color LED strip load leads to the P1 LED Output+ and Output- screw terminals, verifying correct polarity.
Use the optional Push DIM terminals only as shown in the manufacturer's wiring diagram.
Install two AAA batteries into the C1 remote control, observing polarity markings in the battery compartment.
Power on the controller. Pair the remote by short-pressing the ID learning button on the receiver, then pressing and holding the remote ON button for 2 seconds within 10 seconds.

⚠ Precautions

Verify that your DC power supply voltage strictly matches your LED strip working voltage (12V, 24V, 36V, or 48V).
Do not exceed the maximum load rating of 11A (132W at 12V, 240W at 24V, 288W at 36V, 384W at 48V).
Maintain a minimum clearance distance of ≥15cm between adjacent controllers to avoid overheating and signal attenuation.
Do not mount controllers directly against wooden boards without spacers; use a washer ≥7mm thick to provide an air gap for heat dissipation.
Keep the controller at least 100cm away from floor level and at least 15cm away from large metal objects, beams, or structural corners to minimize RF interference.
Allow the magnetic mount double-sided adhesive tape to cure for 24 hours on a clean, dry surface before hanging the remote.

What's in the Box

✓1 × P1 Single Color LED Dimmer Controller
✓1 × C1 RF 2.4GHz Handheld Remote Control
✓1 × Wall-Mount Magnetic Remote Holder
✓1 × Double-Sided Adhesive Pad for Magnetic Mount

Frequently Asked Questions

Q: What LED types is this controller compatible with?

A:The C1+P1 kit is designed exclusively for constant-voltage single color LED strip lights and fixtures operating from 12Vdc to 48Vdc.

Q: How much electrical load can the P1 controller support?

A:The P1 controller supports a maximum load current of 11A, yielding 132W at 12V, 240W at 24V, 288W at 36V, and 384W at 48V.

Q: Does this controller support wired wall switches in addition to wireless control?

A:The P1 controller provides an optional Push DIM interface. Follow the manufacturer's wiring diagram for this connection.

Q: How many remotes can pair with a single P1 controller?

A:A single P1 controller can pair with up to 10 remote controls. If an eleventh remote is paired, the oldest paired remote ID is automatically deleted.

Q: Can one C1 remote control multiple P1 controllers simultaneously?

A:Yes, a single C1 remote can be paired with multiple P1 controllers to provide synchronized multi-receiver dimming across a zone.

Q: How do you clear paired remote codes from the controller?

A:Press and hold the ID learning button on the P1 controller for 6 seconds; the connected load light will flash 4 times quickly and remain on to confirm code deletion.

Q: Are batteries included with the C1 remote control?

A:No, the C1 remote requires two AAA 1.5V batteries (3Vdc total), which must be purchased separately.

11A Wireless LED Tape Dimmer Controller Set With AAA Battery Remote C1+P1