| Select Light Color : | RGB + Warm White 3000K (Base), RGB+ Natural white 4000K (Base), RGB+ Daylight White 6500K (Base) |
|---|---|
| Select Quantity: | 20pcs/string (Base) |
| Select Waterproof Rating: | IP65 Waterproof (Base) |
| Availability | In Stock |
| Condition | Brand New |
The LED Backlighting Module Matrix delivers wide-beam architectural illumination engineered for large outdoor signage, stretch ceilings, and lightboxes. This 20-piece string of Modular Lights runs on DC 24V and draws 6W per 70 x 70 mm block (120W total per string). Each square block contains 8 LEDs covered with specialized 175-degree batwing optical lenses that disperse light evenly at shallow cavity depths, eliminating pinpoint hotspots. Electrical components on each module are sealed under a protective glue encapsulation to achieve an IP65 waterproof rating, and pre-molded mounting feet allow rapid mechanical screw fastening to mounting panels or backplanes. Each string comes factory-terminated with 5-pin JST-SM connectors on both ends for clean interconnection.
Each module integrates 8 optical lenses producing an ultra-wide 175-degree batwing beam angle to eliminate dark spots in shallow lightbox enclosures.
Exposed electronic components are sealed under an engineered glue layer to guard against moisture, outdoor condensation, and airborne dust.
Each 70 x 70 mm square module features corner mounting tabs that enable direct, stable mechanical screw fastening to structural surfaces.
Interconnected by flexible 5-core color wiring terminated with male and female 5-pin JST-SM connectors at opposite ends for secure low-voltage runs.
Blends dynamic multicolor RGB lighting with a true white emitter across 20 interconnected blocks per set, totaling 120W at DC 24V. Each block contains 4 RGB LEDs and 4 White LEDs.
| Parameter | Details |
|---|---|
| Model / SKU | MSLLENS-RGBW-D8Q20 |
| Operating Voltage | DC 24V |
| Power Consumption per Block | 6W |
| Total Power Consumption per String | 120W (20 blocks) |
| Number of Modules | 20 blocks per string |
| LED Count per Module | 8 LEDs with optical lenses |
| Color Configuration | RGBW (Red, Green, Blue, White) |
| Beam Angle | 175 degrees |
| Center Pitching | 25cm ~ 26cm (9.84in ~ 10.23in) |
| Total Length | 510cm ~ 530cm (16.73ft ~ 17.38ft) |
| Module Dimensions | 70 mm x 70 mm (2.76 in x 2.76 in) |
| Ingress Protection Rating | IP65 (dust-tight, water jet resistant) |
| Encapsulation Method | Epoxy potting over exposed electrical components |
| Interconnect Cable | 5-core color-coded insulated wire |
| Terminal Connectors | 5-pin JST-SM connectors on both ends |
| Mounting Method | Integral screw mounting feet on block corners |
| Control Method | Common anode RGBW PWM controller required |
| Operating Temperature | -20 deg C to +50 deg C |
Q: What voltage does it need — does it include a driver?
A: The fixture runs on DC 24V and does not include a built-in AC driver; it requires an external constant-voltage DC 24V power supply rated for at least 150W per 20-block string.
Q: Can this string be cut between modules?
A: Yes, you can cut the 5-core connecting wire between any two blocks to shorten the string; seal any exposed wire ends with waterproof silicone or heat-shrink tubing.
Q: How do I mount it?
A: Every 70 x 70 mm block includes integrated screw mounting feet on its corners, allowing direct mechanical fastening with standard self-tapping or machine screws.