| Select Kit: | Controller (Base) |
|---|---|
| Availability | In Stock |
| Condition | Brand New |
The BC-354 is a constant voltage rgbw controller engineered for direct, tactile color management across common anode LED installations. Operating across an auto-adapting input range of DC 12V to 24V, it delivers up to 5A per channel across 4 distinct outputs (20A combined total), handling 240W at 12V or 480W at 24V without requiring external amplification. Designed for operators who need to know how to control led lights without remote hardware, the unit provides 4 independent manual rotary potentiometers for Red, Green, Blue, and White channels, paired with 4096 grey scale levels per channel for granular color mixing. An onboard 3-digit 7-segment LED digital display provides immediate visual feedback for the active operating mode, speed, and brightness value. Built-in protection automatically halts output and displays an ERR alert if short circuits or overloads occur. Supplying LED strip lights and accessories since 2015, SuperLightingLED has shipped lighting controls to customers in 123 countries and regions, with 26.4% of our customers order again (8,829 of 33,446 buyers).
Adjust Red, Green, Blue, and White independently using 4 continuous rotary knobs without needing a wireless transmitter.
Supports 5A across 4 separate output channels to power up to 240W at 12V DC or 480W at 24V DC directly from terminal blocks.
Uses Pulse-Width-Modulation with 4096 grey scale resolution per channel to eliminate stepping during color transitions.
Features 37 pre-programmed operational patterns including static solids, color skipping, flashing strobes, and multi-color smooth fades.
Internal monitoring shuts down channel output instantly and flashes ERR on the numerical readout upon detecting a short circuit or overload.
Connects to downstream power repeaters via synchronous data lines to expand driving capacity across extensive architectural runs.
| Parameter | Details |
|---|---|
| Product Model | BC-354 |
| Controller Type | Constant Voltage RGBW Rotary Dimmer |
| Operating Voltage | DC 12V - DC 24V (Auto-adapted) |
| Output Channels | 4 Channels (Red, Green, Blue, White) |
| Output Current | 5A per channel (20A total maximum) |
| Maximum Output Power | 240W at 12V DC / 480W at 24V DC |
| Dimming Technology | Pulse-Width-Modulation (PWM) |
| Grey Scale Resolution | 4096 levels per channel |
| Pre-programmed Modes | 37 modes (Static, Jumping, Smooth Fading, Strobe, Cycle) |
| Speed Adjustment | 16 selectable levels |
| Brightness Adjustment | 16 selectable levels |
| Display Type | 3-digit 7-segment numerical LED tube |
| Manual Interface | 4 rotary knobs + 7 membrane push buttons |
| Circuit Protection | Over-current protection, Short-circuit auto shutoff |
| Connection Polarity | Common Anode (V+) |
| Optional RF Distance | Up to 30m with obstacles, 60m line-of-sight (remote optional) |
| Housing Dimensions | 176 mm (L) × 46 mm (W) × 30 mm (H) |
| Net Weight | 210 g |
| Operating Temperature | -20℃ to +55℃ |
| Certifications | CE, RoHS compliant |
PDFBC-354
Q: how to control led lights without remote?
A:The BC-354 features 4 independent rotary knobs and 7 integrated push buttons directly on the chassis. You can dial in custom colors, switch across 37 pre-set modes, change speed, and set brightness without needing a handheld wireless remote.
Q: how to connect rgbw led strip?
A:Connect the positive black wire of your 5-wire LED strip to the V+ terminal, then land the individual Red, Green, Blue, and White negative conductor wires into the corresponding R, G, B, and W output screw terminals.
Q: how to power 24v led strip?
A:Connect a regulated 24V DC constant voltage power supply to the BC-354 input terminals. The controller automatically detects the 24V supply and outputs matched 24V PWM dimming power up to 480W total load.
Q: how to wire 24v led strip?
A:Strip 6-8 mm of insulation from the power feed and strip wires. Land the DC supply wires into INPUT (+ and -), then wire the 24V RGBW LED strip common anode to OUTPUT V+ and channel leads to R, G, B, and W terminals.
Q: what is rgbw led strip?
A:An RGBW LED strip contains four separate diode emitters on the circuit board: Red, Green, Blue, and a dedicated White diode (such as 3000K Warm White or 6000K Pure White). This allows clean pastel tones and pure white illumination that standard RGB strips cannot produce.
Q: how to control rgb led strip without remote?
A:Connect your 4-wire RGB LED strip to the V+, R, G, and B terminals, leaving the W terminal empty. You can then use the R, G, and B rotary knobs and mode buttons on the BC-354 to manually adjust colors and effects.
Q: what is dmx controller for led lights?
A:A DMX controller sends digital serial protocol signals (DMX512) over data cables to decoders, whereas the BC-354 is a standalone constant-voltage PWM power controller that directly drives LED strips using onboard hardware without needing DMX consoles or addressing.
Q: how does rgbw led strip light work?
A:RGBW LED strip lights work by delivering constant voltage power through a common positive anode while modulating current through four separate negative cathode channels. The controller varies the pulse width (PWM) on each channel to produce millions of blended colors.
Q: are my led strip lights rgb or rgbw?
A:Examine the solder pads and copper traces on your LED strip. A standard RGB strip has 4 contact pads labeled (+, R, G, B), whereas an RGBW strip features 5 contact pads labeled (+, R, G, B, W) to drive the extra white channel.
Q: What does it mean when the LED screen displays ERR?
A:The ERR notification indicates that the onboard circuit protection has detected an overload or short circuit on the output terminals. The unit automatically halts power output until the fault is resolved and power is cycled.