| Select Channel Color: | Silver (Base), Black |
|---|---|
| Select Diffuser: | PC opal diffuser (Base), Black PC Diffuser (Base) |
| Select Length: | 3.28ft (1 meter) (Base), 6.56ft (2 meters), 8ft (2.44 meters), 20cm (7.87in) Sample |
| Surface Treatment: | Sandblasted oxidation (Base) |
| Availability | In Stock |
| Condition | Brand New |
The MS-1010 is a mini square-section aluminum LED channel designed to house LED strips up to 8mm wide. With an exterior profile of 10mm by 10mm (0.39in x 0.39in) and an inner bottom clear width of 8.1mm (0.32in), this compact housing provides structural protection and passive heat dissipation for linear accent lighting. The sandblasted oxidation finish offers a fine matte surface texture, available in either silver or black. Configurable with an opal PC diffuser or a black PC diffuser, the unflanged profile can be surface-mounted using matching metal clips or set flush into a routed wood groove for recessed millwork installations.
Outer dimensions of 10mm by 10mm (0.39in x 0.39in) enable discreet installation in tight millwork and cabinet spaces.
Sandblasted oxidation treatment produces a refined, low-glare surface available in silver or black.
Bottom clear inner width of 8.1mm (0.32in) accommodates bare LED strips up to 8mm wide.
Choose between a PC opal diffuser or a stealth black PC diffuser with internal locking legs.
Mount onto surfaces via matching metal clips or embed the unflanged profile into prepared wood grooves.
| Parameter | Details |
|---|---|
| Model | MS-1010 |
| Profile Geometry | Unflanged square section with closed back |
| Outer Width | 10 mm (0.39 in) |
| Outer Height | 10 mm (0.39 in) |
| Bottom Inner Clear Width | 8.1 mm (0.32 in) |
| Max Compatible LED Strip Width | 8 mm |
| Surface Treatment | Sandblasted oxidation |
| Surface Texture | Fine matte |
| Channel Color Options | Silver, Black |
| Diffuser Options | PC opal diffuser, Black PC diffuser |
| Diffuser Mounting | Internal mating locking legs |
| Available Lengths | 0.2 m (7.87 in), 1 m (3.28 ft), 2 m (6.56 ft), 2.44 m (8 ft) |
| Primary Mounting Method | Surface mounting via matching metal clips |
| Alternative Mounting Method | Recessed flush into routed wood groove |
| LED Strip Included | No (sold separately) |
| Power Supply Included | No (sold separately) |
Q: What is the maximum LED strip width compatible with the MS-1010?
A:The MS-1010 features a bottom clear inner width of 8.1mm (0.32in), accommodating LED strips up to 8mm wide.
Q: What lengths are available for the MS-1010 profile?
A:It is available in 20cm (7.87in) sample, 1m (3.28ft), 2m (6.56ft), and 2.44m (8ft) lengths.
Q: Does the MS-1010 provide dot-free illumination?
A:Dot appearance depends on the LED pitch and density of your strip combined with the chosen diffuser; dot-free output is not guaranteed with this compact profile.
Q: How is the MS-1010 installed?
A:The primary installation method is surface mounting with the included metal clips, though the unflanged square body can also be fitted into a routed wood groove.
Q: Can standard solderless strip connectors fit inside this channel?
A:Connector fit depends on the actual connector dimensions and the internal ledges. Compare the physical connector and channel before choosing a connection method; the8.1mm floor width alone does not establish connector clearance.
Q: Are LED strip lights and a power supply included with the channel?
A:No, flexible LED strips and power supplies are sold separately.
The wood-groove image is a cutaway illustration that exposes otherwise hidden internal surfaces. Check the actual profile, endcaps and required retention before routing the installation groove.