


| Select Channel Color: | Silver (Base) |
|---|---|
| Select Diffuser: | Larger Three-Sided Opal Cover (Base) |
| Select Length: | 3.28ft (1 meter) (Base), 6.56ft (2 meters), 8ft (2.44 meters), 20cm (7.87in) Sample |
| Availability | In Stock |
| Condition | Brand New |
The MS-AL-627 is an ultra-compact surface-mounted aluminum extrusion designed specifically for linear accent and task lighting layouts. Measuring 12 mm (0.47 in) wide by 7.5 mm (0.30 in) in total assembled height, this silver aluminum channel provides a low-profile housing that accommodates LED tape lights up to 8 mm wide within its 8.5 mm (0.33 in) clear internal channel floor. Engineered with an empty internal lumen, the profile features a three-sided opal polycarbonate (PC) diffuser bridge that wraps over the profile and snaps securely beneath the aluminum outer shoulders. Suitable for exposed installation beneath shelving, under cabinetry, and within millwork, the MS-AL-627 mounts mechanically via screw-fixed stainless-steel clips for stable, reliable alignment.
Please note: If you insert the light strip from the side, the bottom of the channel can accommodate light strips up to 8 mm wide; if you attach the light strip from the top of the channel down to the bottom, it can only accommodate light strips up to 6 mm wide.
Measures 12 mm (0.47 in) wide with a total assembled height of only 7.5 mm (0.30 in) for compact surface runs.
Features a one-piece opal PC bridge spanning the opening with outer skirts locking under the channel shoulders.
Engineered with an 8.5 mm (0.33 in) internal clear width specifically optimized for bare LED tape up to 8 mm wide.
Installs cleanly with screw-secured stainless-steel mounting clips for solid mechanical retention on shelves or panels.
Natural silver aluminum construction delivers essential rigid support and passive heat transfer for LED lighting strips.
| Parameter | Details |
|---|---|
| Model | MS-AL-627 |
| Material | Extruded Aluminum |
| Profile Color / Finish | Silver Aluminum |
| Diffuser Material | Opal Polycarbonate (PC) |
| Diffuser Style | Three-sided wrap-around PC bridge |
| Overall Assembled Width | 12 mm (0.47 in) |
| Aluminum Extrusion Height | 6.5 mm (0.26 in) |
| Total Assembled Height | 7.5 mm (0.30 in) |
| Internal Clear Width | 8.5 mm (0.33 in) |
| Max Compatible LED Strip Width | Up to 8 mm |
| Internal Lumen Configuration | Empty lumen |
| Mounting Method | Exposed surface mount via screw-fixed clips |
| Mounting Clip Material | Stainless steel |
| Available Lengths | 0.2 m (7.87 in / 0.66 ft), 1 m (39.37 in / 3.28 ft), 2 m (78.74 in / 6.56 ft), 2.44 m (96.06 in / 8.0 ft) |
| Adhesive Mounting | Not supported (profile requires mechanical clips) |
| Compatible Components | Aluminum channel, PC diffuser, matching end caps, mounting clips |
| LED Strip & Power Supply | Sold separately |
⚠ Precautions
Q: How does the three-sided opal PC diffuser attach to the channel?
A:The diffuser is a one-piece polycarbonate bridge that spans the channel opening, with two outer skirts that turn inward and snap directly under the aluminum shoulders.
Q: Does this channel provide completely dot-free illumination?
A:Dot-free output is not guaranteed. Visibility of diode spotting depends on the pitch, spacing, and density of the LED strip light installed inside.
Q: What lengths are offered for this profile model?
A:The MS-AL-627 is available exclusively in 0.2 m (7.87 in / 0.66 ft) sample length, 1 m (39.37 in / 3.28 ft), 2 m (78.74 in / 6.56 ft), and 2.44 m (96.06 in / 8.0 ft) lengths.