Spec Sheet - JY-P5615A

Select Channel Color:	Silver (Base)
Select Diffuser:	Silicone semi-clear diffuser (Base)
Select Length:	3.28ft (1 meter) (Base), 6.56ft (2 meters), 8ft (2.44 meters), 20cm (7.87in) Sample
Availability	In Stock
Condition	Brand New

The JY-P5615A Flexible Plaster-In LED Aluminum Channel is designed for trimless, recessed ceiling architectural lighting installations. Featuring a 56 mm overall wing span and a 15 mm central profile width with a 15 mm section height, this profile integrates directly into drywall and ceiling plasterwork for a clean, flush linear aesthetic. Its 12.6 mm inner channel width accommodates flexible LED tape lights up to 12.6 mm wide. Paired with a semi-clear silicone diffuser, the channel provides gentle light dispersion and physical defense for interior strip lighting. Manufactured with a durable silver aluminum finish, it ensures consistent passive thermal management for extended LED lifespan. Choose from lengths including 20cm (7.87in) samples, 1m (3.28ft), 2m (6.56ft), and 2.44m (8ft).

Key Features

Trimless Plaster-In Mounting

Perforated wings allow seamless skim-coating into ceiling plasterboard for a completely flush architectural line.

12.6 mm Inner Width

Houses flexible LED tape lights up to 12.6 mm wide with ample clearance for straight runs.

Semi-Clear Silicone Diffuser

Softens direct diode glare and shields the light source from dust and airborne debris.

Passive Heat Dissipation

Constructed from silver aluminum extrusion that draws heat away from the LED strip to preserve operating stability.

Multiple Length Configurations

Offered in 20cm (7.87in) sample, 3.28ft (1m), 6.56ft (2m), and 8ft (2.44m) segments to suit diverse project scales.

Technical Highlights

Architectural profile with a 56 mm (2.20 in) overall wing span for secure plaster-in skim anchoring.
Central channel dimension of 15 mm (0.59 in) width and 15 mm (0.59 in) overall depth.
Internal cavity accommodates LED strips up to 12.6 mm (0.50 in) across the mounting bed.
Semi-clear flexible silicone cover option available as cut-to-length or continuous whole rolls.
Rigid extruded silver aluminum profile provides continuous structural support along ceiling runs.

Product Specifications

Parameter	Details
Model	JY-P5615A
Product Type	Flexible Plaster-In LED Aluminum Channel
Mounting Type	Plaster-in recessed ceiling
Channel Color	Silver
Material	Aluminum alloy
Diffuser Material	Semi-clear silicone
Overall Wing Span	56 mm (2.20 in)
Central Channel Width	15 mm (0.59 in)
Section Height	15 mm (0.59 in)
Inner Width	12.6 mm (0.50 in)
Maximum Strip Width	12.6 mm
Available Lengths	20cm (7.87in) Sample, 3.28ft (1m), 6.56ft (2m), 8ft (2.44m)
Cover Length Options	Cut to Your Order Length, Whole Roll Not Cutting
Light Source Included	No (LED strip sold separately)
Power Supply Included	No (power supply sold separately)

Application Scenarios

Recessed Ceiling Linear Lighting Embed directly into plasterboard ceilings to establish seamless, trimless architectural lighting channels that blend invisibly into modern residential and commercial drywall.

Commercial Office & Retail Layouts Construct continuous recessed light runs across conference rooms, corporate lobbies, and retail display spaces requiring clean flush-mounted linear illumination.

Modern Residential Interior Accents Enhance living rooms, hallways, and kitchen ceilings with trimless recessed overhead lighting tracks without visible channel flanges or surface frames.

How to Install This Aluminum Profile

Measure the ceiling run and route or cut a ceiling drywall slot matching the 15 mm central channel width and 15 mm section depth.
Trim the aluminum channel to the required length using a fine-tooth miter saw, deburring all cut edges before installation.
Align the profile into the ceiling opening, secure the 56 mm perforated wings flush against the drywall, and plaster over the wings up to the channel opening.
Allow plaster and paint to dry fully, then clean the 12.6 mm inner channel base to ensure proper adhesion for your LED strip.
Peel the backing tape from your compatible flexible LED strip (up to 12.6 mm wide) and press it firmly along the inner aluminum floor.
Press the semi-clear silicone diffuser evenly into the channel profile until it snaps flush along the entire length.

⚠ Precautions

Confirm that your LED strip PCB width does not exceed the 12.6 mm inner width limit before installation.
Always deburr cut edges thoroughly to avoid slicing LED strip insulation or wiring leads during insertion.
Ensure direct, flat contact between the LED strip adhesive backing and the aluminum base for optimal heat dissipation.
Do not apply joint compound or paint inside the 12.6 mm channel or across the optical diffuser face.

What's in the Box

✓JY-P5615A Plaster-In LED Aluminum Channel (selected length)
✓Semi-Clear Silicone Diffuser (selected length/roll option)

Frequently Asked Questions

Q: What is the maximum LED strip width compatible with the JY-P5615A channel?

A:The channel features an inner width of 12.6 mm (0.50 in), accepting LED strip lights up to 12.6 mm wide.

Q: Are LED strip lights and power supplies included with this profile?

A:No. The LED strip light and power supply are sold separately and must be selected based on your project requirements.

Q: What profile lengths are available for purchase?

A:The JY-P5615A is available in 20cm (7.87in) Sample, 3.28ft (1 meter), 6.56ft (2 meters), and 8ft (2.44 meters) lengths.

Q: What type of diffuser is provided with this channel?

A:It comes with a semi-clear silicone diffuser, available either cut to order length or as an uncut continuous roll.

Q: Where is this profile intended to be installed?

A:This channel is designed specifically for plaster-in recessed ceiling installations in drywall and plasterboard.

Q: Does this channel provide a guaranteed dot-free lighting effect?

A:The semi-clear silicone diffuser softens direct diode glare and disperses light, but spotting depends on the diode pitch, LED density, and output of your chosen strip.

JY-P5615A Flexible Plaster-In LED Aluminum Channel 12.6mm