Go to Top
SuperLightingLED
SUPERLIGHTINGLED CO., LTD
Web: www.superlightingled.com
Email: [email protected]
Date: 2026-11-18 | ID: 7381

MS-AL-620 Wide Low-Profile Surface Mount LED Aluminum Channel

MODEL: MS-AL-620
Price based on selections below:
$11.98 $8.9925% off
Select Channel Color:Silver (Base)
Select Diffuser:PC opal diffuser (Base)
Select Length:3.28ft (1 meter) (Base), 6.56ft (2 meters), 8ft (2.44 meters), 20cm (7.87in) Sample
AvailabilityIn Stock
ConditionBrand New
Technical Specifications

The MS-AL-620 is a wide, low-profile LED aluminum channel engineered for clean, stable surface mount architectural and task lighting installations. Featuring a generous 39 mm (1.54 in) overall width and a 26.8 mm (1.06 in) inner width, this profile accommodates wider linear lighting layouts while maintaining a slim physical depth. The profile includes a PC opal diffuser that provides even light diffusion across the channel face. Fabricated with a durable silver aluminum finish, it provides rigid structural backing and passive heat dissipation for your linear LED strips. Please note that LED strip lights and power supplies are sold separately, allowing full customization for your specific driver and tape specifications.

Key Features

Wide Channel Architecture

Engineered with a 26.8 mm (1.06 in) inner width and a 39 mm (1.54 in) overall width.

Low-Profile Datum Profile

Constructed with a 7.1 mm (0.28 in) dimension from the diffuser face to the center support plate datum.

Surface Mount Design

Configured specifically for straightforward surface-mounted installations on flat planes.

PC Opal Diffuser

Includes a durable polycarbonate opal diffuser for balanced light output.

Silver Aluminum Construction

Provides solid structural housing and effective passive thermal management.

Technical Highlights

  • Features an overall profile width of 39 mm (1.54 in) with an interior channel width of 26.8 mm (1.06 in).
  • Includes a verified 7.1 mm (0.28 in) datum dimension measured from the diffuser face to the center support plate back.
  • Available in multiple cut lengths: 20cm (7.87in) Sample, 1 meter (3.28ft), 2 meters (6.56ft), and 2.44 meters (8ft).
  • Designed strictly for surface mount deployment with a protective PC opal cover.

Product Specifications

ParameterDetails
ModelMS-AL-620
Product TypeWide Low-Profile LED Aluminum Channel
Installation TypeSurface mount
Overall Width39 mm (1.54 in)
Inner Width26.8 mm (1.06 in)
Diffuser-Face to Center Support Datum7.1 mm (0.28 in)
Datum ClarificationDimension measured from diffuser face to center support plate back, not overall height or wing depth
Profile MaterialAluminum
Channel ColorSilver
Diffuser TypePC opal diffuser
Diffuser MaterialPolycarbonate (PC)
Offered Length 120cm (7.87in) Sample
Offered Length 23.28ft (1 meter)
Offered Length 36.56ft (2 meters)
Offered Length 48ft (2.44 meters)
LED StripsSold separately
Power SupplySold separately

Application Scenarios

Under-Cabinet and Joinery Lighting Surface mounted beneath kitchen cabinetry, shelving, and credenzas to produce wide, direct task illumination without bulky ceiling cutouts.
Architectural Surface Runs Installed directly along flat walls, baseboards, or soffits where a wide low-profile linear aluminum channel fits shallow physical constraints.
Retail and Display Shelving Applied across commercial display counters and merchandising cases requiring a clean silver extrusion with a PC opal diffuser.

How to Install This Aluminum Profile

  1. Measure the intended installation area and cut the aluminum channel and PC opal diffuser to your required length using a fine-tooth blade.
  2. Smooth and deburr all cut aluminum edges and diffuser ends to avoid damaging internal electrical components.
  3. Position and surface-mount the aluminum channel securely onto your flat mounting plane.
  4. Verify your LED strip width does not exceed the 26.8 mm (1.06 in) inner width measurement.
  5. Clean the interior channel base, expose the strip adhesive backing, and firmly adhere the LED strip inside.
  6. Install the PC opal diffuser cover into the channel to complete the assembly.
⚠ Precautions
  • Confirm that your LED strip width fits within the 26.8 mm inner width before installation.
  • Carefully deburr all cut edges after trimming to ensure safety and prevent damage to components.
  • Ensure the profile is mounted on a flat surface to maintain proper heat dissipation along the aluminum body.
  • LED strips and power supplies are sold separately.

What's in the Box

  • ✓MS-AL-620 Aluminum Channel (selected length and silver finish)
  • ✓PC opal diffuser cover (matching ordered length)

Frequently Asked Questions

Q: What is the inner width of the MS-AL-620 channel?

A:The inner width of the MS-AL-620 profile is 26.8 mm (1.06 in).

Q: What does the 7.1 mm measurement represent?

A:The 7.1 mm (0.28 in) measurement is a datum dimension from the diffuser face to the back of the center support plate, not an overall profile height or wing depth.

Q: What mounting type does this channel support?

A:The MS-AL-620 channel is configured specifically for surface mount installations.

Q: What standard lengths are available for order?

A:Available options include 20cm (7.87in) Sample, 3.28ft (1 meter), 6.56ft (2 meters), and 8ft (2.44 meters).

Q: What diffuser cover comes with this channel?

A:The profile is supplied with a PC opal diffuser.

Q: Are LED strip lights and power supplies included with the profile?

A:No, LED strip lights and power supplies are sold separately.

© 2026 SuperLightingLED. All specifications are subject to change without notice.