| Select Colour: | White (Base) |
|---|---|
| Select Current: | 150-500mA (Base), 350-1200mA (Base) |
| Availability | In Stock |
| Condition | Brand New |
Multiple current/RDM/Stand-alone function/Seven PWM frequency/Linear or logarithmic dimming/Numeric display/Din Rail
DC to DC constant current output, multiple output current settings.
● Comply with the DMX512 standard protocols.
● Digital numeric display, set DMX decode start address by buttons.
● RDM function can realize intercommunication between DMX master and decoder. For example, DMX decoder address can be set by DMX master console.
● 1/2/4 DMX channel output selectable.
● 16bit (65536 levels) /8bit (256 levels) grey level selectable.
● PWM frequency 250/500/1000/2000/4000/8000/16000Hz selectable.
● Logarithmic or linear dimming curve selectable.
● Stand-alone RGB/RGBW mode and 4 channel dimmer mode selectable, which be controlled by buttons with built-in programs, instead of DMX signal.
● Available in white or black.
Standards and Certifications
D4C 
Note:
1. Connecting with a green terminal(DMX AMP) or an extra amplifier will be needed when more than 32 decoders are connected or use an overlong signal line, signal amplification should not be more than 5 times continuously.
2. If the recoil effect occurs because of a longer signal line or bad line quality, please try to connect 0.25W to The 90-120Ω terminal resistor at the end of each DMX signal line.
