Spec Sheet - CONHV-750W-4

Select Input Voltage:	110V±20% (US, CA) - Max 350W (Base), 220V±20% (EU, UK, AU) - Max 700W (Base)
Select Plug Type:	US (Base), UK (Base), EU (Base), AU (Base)
Availability	In Stock
Condition	Brand New

RF controller adopts advanced computer control chip to control various 110V / 220V lamps with LED as light source, such as: LED high-pressure lamp strips, rainbow tubes and other high-pressure lamps and lanterns; With the advantages of convenient connection and simple

use; this product has many kinds of change can realize seven-color jumping, gradual change, stroboscopic, static color and other light changes according to the actual needs of customers, with power saving and memory functions, and avoid frequent setting

This controller has two kind of input power, AC110V and AC220V, According to the power rule, when the AC is halved, the output power is also halved.

if you choose AC110V, we will send US plug to you, and AC110V can only output 350watt power, so it can only support Maximum connect 25meter/41feet 110-220V high voltage led strips.

If you choose AC220V, we will send EU plug to you, and AC220V output 700W, so it can support Maximum connect 50meter/82feet AC220-230V high voltage led strips.

When calculating the power of your project, please do not exceed 80% of Power Supply capacity when calculating Power Supply size to use in your system.

So 220V/700W we recommend that you Maximum connect 82feet, 110V/350W we recommend that you Maximum connect 41feet.

If your lighting project length more than controller output power, please use a 1500W high voltage amplifier. If your outdoor large lighting project needs to achieve effect and color synchronization, we recommend that you use some DMX high-pressure decoders to control them through the DMX console.

How to connct, please feel free to contact us AT [email protected]

Instructions for use:

1. Insert the light bar plug into the controller's output socket. The line sequence should correspond.

2. The power plug is energized, and the remote controller can be used to operate the controller as required.

3. When installing the controller, install the remote control receiver in an obstacle-free position to avoid remote control failure.

4. Don't short out the output

Controller technical parameters:

1: Operating voltage: AC110-220v

2: Control current: 4A channel.

3: Control distance: 10M

4: Operating temperature: -40°C-60°C

Standards and Certifications

AC110-220V

Connection Diagram

How to connect the whole roll of led strips

How to use WiFi Amazon Alexa smart switch to connect led strips, you need a wifi switch, click to buy

How to use Amplifier to connect super long led strips

How to Use DMX decoder to control large led strip lighting project

Applications

Back/task lighting
Cove LED lighting
Retail LED lighting
Display case LED lighting
Accent LED lights
Under cabinet lighting
led stage lighting

Note

AC110V or 220V power input, the output high voltage AC110V or 220V article lamp directly. Article AC110v or 220 v meet in the same line, at the same time electricity.

The quality assurance for one year. Artificial damage or misuse damage is not within the warranty.

Safety

Supply input voltage of this product is AC110V or AC220V.

Shorting output wires my cause damage to controller.

Always observe proper polarity when connecting high voltage led strip lights and load.

For indoor use only - this product is not waterproof or weatherproof.

You can Custom Wire Order, G,V+,R,B

Package including

1 x High Voltage led controller

1 x RF remote control

1 x 4-Pins

1 x Piece of User's Manual

AC110V/220V 700W 24Keys IR 16 Colors Remote RGB Controller, For Outdoor Glass Curtain Wall Lighting Project 5050 SMD LED Strip lights