Spec Sheet - CONHV-1500W-5

Select Input Voltage:	110V±20% (US, CA) (Base), 220V±20% (EU, UK, AU) (Base)
Select Plug Type:	US (Base), UK (Base), EU (Base), AU (Base)
Availability	In Stock
Condition	Brand New

This controller has two kind of input power, AC110V and AC220V, According to the power rule, when the AC is halved, the output power is also halved. AC110V can only output 1000watt power, and AC220V output 1500W.

This product uses infrared remote control, single-button function control is simple and clear, can achieve gradual, jump, flashing and other dynamic functions, with off memory function, without frequent settings, speed and brightness can be adjusted.

Instructions for use:

1. Insert the light bar plug into the controller's output socket. The line sequence should correspond.

2. The power plug is energized, and the remote controller can be used to operate the controller as required.

3. When installing the controller, install the remote control receiver in an obstacle-free position to avoid remote control failure.

4. Connect the light bar If the color of the remote control does not correspond to the color of the light, press and hold the 6 buttons for 3 seconds (retrofit sequence) respectively. The light will automatically change the line sequence. Each of the 6 buttons corresponds to a line sequence.

Controller technical parameters:

1: Operating voltage: AC110-220v

2: Control current: 9A

3: Control distance: 10M

4: Operating temperature: -40°C-60°C

Standards and Certifications

AC110-220V