| Select Control Type: | Bluetooth + RF, RF Remote (Base), RF Remote + Tuya WiFi |
|---|---|
| Select Input Voltage: | 220V±20% (EU, UK, AU) (Base), 110V±20% (US, CA) - Only 360W (Base) |
| Select Plug Type: | US (Base), UK (Base), EU (Base), AU (Base) |
| Availability | In Stock |
| Condition | Brand New |
RF controller adopts advanced computer control chip to control various 110V / 220V lamps with LED as light source, such as: LED high-pressure lamp strips, rainbow tubes and other high-pressure lamps and lanterns; With the advantages of convenient connection and simple use; this product has many kinds of change can realize seven-color jumping, gradual change, stroboscopic, static color and other light changes according to the actual needs of customers, with power saving and memory functions, and avoid frequent setting.
This controller has two kind of input power, AC110V and AC220V, According to the power rule, when the AC is halved, the output power is also halved.
if you choose AC110V, we will send US plug to you, and AC110V can only output 375watt power, so it can only support Maximum connect 25meter/82feet 110-220V high voltage led strips.
If you choose AC220V, we will send EU plug to you, and AC220V output 750W, so it can support Maximum connect 500meter/164feet AC220-230V high voltage led strips.
When calculating the power of your project, please do not exceed 80% of Power Supply capacity when calculating Power Supply size to use in your system. So 220V/150W we recommend that you Maximum connect 164feet, 110V/375W we recommend that you Maximum connect 82feet.
This product uses RF remote control, you can remotely adjust the cold white warm white light and brightness, can be set to delay shutdown, with broken memory function, without frequent settings. This product is suitable for all kinds of high-voltage LED monochromatic light strips and rainbow tubes
Feature Mode List
1. ON/OFF: Power on/off.
2.SPEED-/SPEED+: Speed adjustment when dynamic.
3.LINGHT: Brightest brightness.
4.: Brightness adjustment.
5.MODE+/MODE-: 8 kinds of dynamic mode selection.
6.10%-100%: Brightness ratio selection.
7.Time 5-60: Delay off time selection
Controller technical parameters:
1: Operating voltage: AC110-220v
2: Control current: 4A
3: Control distance: 10M
4: Operating temperature: -40°C-60°C
Instructions for use:
1. Insert the light bar plug into the output socket of the controller. The positive and negative poles of the controller and the light bar should correspond. Check whether there is a short circuit in the position of the light bar. If there is a short circuit, please handle it and then turn on the power. Otherwise it will damage the controller and Light.
2. The power plug is energized, and the remote controller can be used to operate the controller as required.
3. When installing the controller, install the remote control receiver in an obstacle-free position to avoid remote control failure.
Connection Diagram
How to connect the whole roll of led strips
How to use WiFi Amazon Alexa smart switch to connect led strips, you need a wifi switch, click to buy
How to use Amplifier to connect super long led strips
How to Use DMX decoder to control large led strip lighting project
Applications
Back/task lighting
Cove LED lighting
Retail LED lighting
Display case LED lighting
Accent LED lights
Under cabinet lighting
led stage lighting
Note
AC110V or 220V power input, the output high voltage AC110V or 220V article lamp directly. Article AC110v or 220 v meet in the same line, at the same time electricity.
The quality assurance for one year. Artificial damage or misuse damage is not within the warranty.
Safety
Supply input voltage of this product is AC110V or AC220V.
Shorting output wires my cause damage to controller.
Always observe proper polarity when connecting high voltage led strip lights and load.
For indoor use only - this product is not waterproof or weatherproof.
Package including
1 x High Voltage led controller
1 x RF remote control
1 x 2-Pins
1 x Piece of User's Manual