| Select Length: | 16.4ft (5 meters) (Base) |
|---|---|
| Select PCB Width: | 12mm (0.47in) (Base) |
| Select Waterproof Rating: | Non-Waterproof IP20 - Adhesive Back (Base) |
| Availability | In Stock |
| Condition | Brand New |
This programmable TM1812 led strip is a intelligent control LED light source that the control circuit and RGB chip are integrated in a package of 5050 components. 5m (16.45ft) Per Reel By Sale. Dynamic color chasing, sequencing, changing, and also static color modes are available, achieved by an addressable led controller.
It internal include intelligent digital port data latch and signal reshaping amplification drive circuit. Also include a precision internal oscillator and a 12V voltage programmable constant curre-nt control part, effectively ensuring the pixel point light color height consistent. The data transfer protocol use single NZR communication mode. After the pixel power-on reset, the DIN port receive data from controller, the first pixel collect initial 24bit data then sent to the internal data latch, the other data which reshaping by the internal signal reshaping amplification circuit sent to the next cascade pixel through the DO port. After transmission for each pixel, the signal to reduce 24bit. pixel adopt auto resha-ping transmit technology, making the pixel cascade number is not limited the signal transmission, only depend on the speed of signal transmission.
Non-Waterproof IP20 light strips with adhesive backing and can be stuck just about anywhere (except IP67/IP68 type which will come with mounting brackets). This TM1812 strip can be cut into 12-LED segments, so you could cut a different length for your project and request.
TM1812 Data Sheet PDF Download 
Standards and Certifications
Product Specification
| LED Strip Type: | SMD5050 Addressable RGB LED Strip 300LEDs/16.4ft |
| LED Chip: | 16-pin TM1812 Single Signal External IC |
| Input Voltage: | DC12V |
| Power: | 72W/16.4ft 14.4W/m Max |
| Working Temperature: | -4°F (-20°C) ~ 122°F (50°C) |
| Storage Temperature: | -40°F (-40°C) ~ 176°F (80°C) |
| LED Color: | Addressable RGB |
| PCB Width: | 12mm/0.47" |
| LED Quantity: | 60 LEDs/m, 300 LEDs 16.4ft |
| IC Quantity: | 20 ICs/m, 100 ICs/roll |
| Cuttable: | 12-LED, 200mm/7.87" |
| Waterproof Rating: | Non-waterproof IP20 / Indoor waterproof IP65 / Outdoor Waterproof IP67 |
| Lumen Per LED: | 24~26Lumen 1560lm Max /3.28ft |
| Dimensions: | L500cm(196.8 in) x W1.0cm(0.39 in) x H0.25cm(0.10 in) |
| Lifespan: | 50,000+hours |
| Beam Angle: | 120° |
| Wavelength NM(RGBY): | 2000-2500mcd |
Waterproof Level Description
IP20 Non-waterproof (The PCB [Printed Circuit Board] surface of the bare, with a self-adhesive back, For Indoor);
IP65 Waterproof (Epoxy cover waterproof, PCB surface is encapsulated with plastic Gel, with self-adhesive 3M back, For Outdoor & Indoor);
IP67 Waterproof (Silicon sleeve waterproof, PCB is encapsulated with silicon tube, with a plastic fastener, better waterproof, For Outdoor);
