Go to Top
SuperLightingLED
SUPERLIGHTINGLED CO., LTD
Web: www.superlightingled.com
Email: [email protected]
Date: 2026-10-09 | ID: 1851

6pin RGB CCT LED Easy Connector 6 pin 12mm Width Solderless Adapter For RGB+CCT LED Strip Lights 1 Clip

MODEL: RGB/CCT-ACCESSORIE-1
Price based on selections below:
$0.99
AvailabilityIn Stock
ConditionBrand New
Technical Specifications

Effortlessly create custom-length lighting installations with our 6-Pin RGB+CCT Solderless LED Strip Connector. Designed specifically for 12mm wide non-waterproof RGBCCT LED strips, this adapter eliminates the need for complicated soldering. The intuitive clip-down design allows you to securely attach a wire lead to any cut section of your LED tape, providing a stable and reliable connection in seconds. Whether you're making a new run, repairing a segment, or bridging a gap in your layout, this strip-to-wire connector is the essential tool for a clean, professional, and fast installation. It's the simplest way to power up your custom lighting projects.

Key Features

Solder-Free Installation

Features a simple, robust clip mechanism that pierces the contacts for a secure connection without any soldering.

Precise Compatibility

Engineered exclusively for 6-pin, 12mm wide IP20 (non-waterproof) RGB+CCT LED strip lights.

Reliable Strip-to-Wire Link

Creates a strong electrical connection from a cut strip section to a 15cm wire lead for powering or extending your lights.

Flexible & Tidy Setups

The 15cm (0.49ft) attached wire provides ample length to route power around obstacles and maintain a clean installation.

Technical Highlights

  • Flame-retardant polycarbonate housing for enhanced safety.
  • Sharp copper contacts ensure maximum conductivity and a lasting connection.
  • Compact single-clip design for minimal visual impact in tight spaces.

Product Specifications

ParameterDetails
ModelRGB/CCT-ACCESSORIE-1
Product TypeSolderless LED Connector
Connection TypeStrip to Wire (1 Clip)
Pin Count6
Compatible Strip Width12mm
Compatible Strip TypeIP20 Non-Waterproof RGBCCT LED Strips
Wire Length15cm / 0.49ft
Housing MaterialPolycarbonate
Contact MaterialCopper
Max Voltage SupportedDC 24V
Max Current Supported5A

Application Scenarios

Custom Under Cabinet Lighting Perfect for creating custom-length lighting runs under kitchen cabinets or shelves. Use this connector to attach power leads to strip segments cut precisely to size, ensuring a perfect fit without wasted strip.
Cove and Architectural Accents When installing long runs of RGBCCT LED strips in coves or as architectural details, you often need to jump gaps or start new power feeds. This connector provides a quick and reliable way to wire up individual sections.
DIY Lighting Projects & Repairs An essential component for any DIY enthusiast. Easily add a power connection to a leftover piece of an LED strip for a new project or quickly repair a damaged connection on an existing installation without needing a soldering iron.

How to Use This Solderless Connector

  1. First, ensure all power is disconnected from your LED lighting system.
  2. Make a clean cut along the designated cutting line on your 12mm RGBCCT LED strip.
  3. Open the hinged transparent cover of the connector to expose the internal pins.
  4. Carefully slide the end of the LED strip into the connector, ensuring the 6 copper pads on the strip align perfectly with the 6 metal pins inside.
  5. Firmly press the transparent cover down until it snaps securely shut. The pins will pierce the strip's contact pads to establish a connection.
  6. Connect the red and black wires to the corresponding terminals on your controller or LED power supply.
  7. Briefly restore power to test the connection before finalizing your installation.
⚠ Precautions
  • This connector is designed for use with IP20 non-waterproof LED strips only. Do not use in damp or wet locations.
  • Verify your LED strip is exactly 12mm wide and has a 6-pin RGBCCT layout before purchasing.
  • Ensure the polarity of the wires is correctly matched to your power source or controller to avoid damage.

What's in the Box

  • ✓1 x 6-Pin 12mm Solderless Connector for RGB+CCT LED Strip (Strip-to-Wire)

Frequently Asked Questions

Q: Do I need to solder this connector?

A:No, this is a completely solderless LED strip connector. It uses a secure clamp mechanism to create the electrical connection.

Q: Will this connector work with my 10mm wide or 4-pin RGB strip?

A:No. This connector is specifically designed for 12mm wide, 6-pin RGBCCT LED strips. Using it with other sizes or pin counts will not work.

Q: Is this connector waterproof?

A:This connector is not waterproof and should only be used with IP20 non-waterproof LED strips in dry, indoor environments.

Q: What is a strip-to-wire connector used for?

A:It's used to attach a power lead (wire) to a cut section of an LED strip, allowing you to connect it to a power supply or controller.

Q: How do I ensure a good, reliable connection?

A:Make sure your LED strip is cut cleanly on the marked cut line and that the copper pads are fully inserted and aligned under the connector's pins before clamping it shut.

Q: Can I use this to connect two LED strips together without wire?

A:No, this model connects one strip to a wire. To connect two strips directly, you would need a strip-to-strip or 'coupler' style connector.

© 2026 SuperLightingLED. All specifications are subject to change without notice.