Is this 4 pin led light strip connector reusable?

Yes, you can carefully pry open the clamp to remove or reposition the strip. However, for the most reliable connection, we recommend using a new connector for each permanent installation.

Do I need to solder anything?

No, this is a completely solderless connector. It uses a piercing clamp mechanism to establish a secure electrical connection, making it ideal for quick installations and DIY projects.

Will this work with addressable or DMX LED strips?

Yes, unlike many basic RGB connectors, this model is compatible with 10mm 4-pin dual-signal addressable strips and single-signal DMX512 LED strips.

How do I use this with a waterproof (IP65) strip?

You must remove the thin layer of silicone coating from the copper contact pads at the end of the strip before inserting it. A sharp craft knife can be used to carefully scrape it off.

What is the purpose of the optional extension wire?

The option with the 1.64ft (0.5m) wire is a pre-made jumper. It's perfect for connecting a strip segment to a controller or for bridging gaps between two strip segments.

What is a 'hippo-buckle' connector?

It's a descriptive term for this style of clamp-down connector, where the cover hinges open like a mouth and snaps shut tightly to secure the LED strip.

Spec Sheet - RGB-ACCESSORIE-013

Select Applied to:	Non-waterproof IP20 (Base), Waterproof IP65 (Base)
Select Connector Type:	1Strip to Wire Connector Only (Base), 1Strip to Wire Connector + Wire Cable
Select PCB Width:	10mm (0.39in) (Base)
Availability	In Stock
Condition	Brand New

Create clean, reliable connections for your lighting projects with our Solderless 4-Pin RGB Strip Light Connector. This innovative "hippo-buckle" connector eliminates the need for soldering, allowing you to quickly and securely link your 10mm 4-pin LED strip to a controller or create a board-to-board jumper. Its versatility is its greatest strength; this isn't just a standard 4 pin led strip connector. It's fully compatible not only with conventional 5050 RGB Flexible LED Strip Lights, but also with many dual-signal addressable strips and single-signal DMX512 LED strips that use a 4-conductor layout. Available for both non-waterproof (IP20) and silicone-coated waterproof (IP65) strips, and with an optional 1.64ft extension wire, this connector provides the ultimate flexibility for your custom DIY lighting installations.

Key Features

Effortless Solder-Free Setup

Features a robust 'hippo-buckle' clamp that pierces the strip's contact pads for a secure connection without any soldering.

Waterproof & Non-Waterproof Versions

Choose the correct version to match your needs, whether you're using standard IP20 indoor strips or IP65 silicone-coated strips.

DIY Project Flexibility

Available as a connector only, or with a pre-attached 1.64ft (0.5m) 20AWG 4-conductor wire to easily bridge gaps or connect to an RGB controller.

Secure & Reliable Connection

The piercing contact design and strong clamping mechanism ensure your strip and wire stay firmly in place, preventing accidental disconnection.

Product Specifications

Parameter	Details
Model	RGB-ACCESSORIE-013
Product Type	Strip-to-Wire Connector
Pins	4
Compatible PCB Width	10mm (0.39in)
Compatible Strip Types	Standard RGB, Dual-Signal Addressable, Single-Signal DMX
Connection Method	Solderless (Clamp-down)
Compatible Strip IP Rating	IP20 (Non-waterproof) or IP65 (Surface-coating waterproof)
Wire Gauge (Optional Cable)	20AWG
Wire Length (Optional Cable)	1.64ft / 0.5m
Materials	Plastic, Copper

Application Scenarios

Custom Under-Cabinet & Cove Lighting Perfect for connecting multiple cut segments of an LED strip back to a centrally located RGB controller. The optional extension wire makes it easy to hide wiring and bridge gaps between cabinets or architectural features.

Navigating Obstacles and Corners Use the strip-to-wire configuration to create flexible jumpers that can go around tight corners, appliances, or other obstacles where the LED strip itself cannot bend, ensuring a continuous lighting effect without damage.

How to Use This 4-Pin Strip Connector

Ensure your power is off. Confirm your LED strip is 10mm wide and has 4 copper contact pads.
Snap open the transparent cover of the connector.
Gently slide the end of the LED strip into the connector. Make sure the 4 copper pads on the strip are aligned directly above the 4 metal pins inside the connector.
Firmly press the transparent cover down until you hear a distinct 'click'. This action pierces the contact pads and locks the strip in place.
Verify the connection is secure by gently tugging on the strip and wire. Connect the wire end to your controller or power source, matching the polarity.

⚠ Precautions

This connector is designed specifically for 10mm 4-pin LED strips. It is not compatible with other widths (e.g., 8mm, 12mm) or pin counts (2, 3, 5, or 6-pin).
Always double-check the polarity markings (+, G, R, B or +, V, D, G) on your strip and ensure they correspond correctly to your controller's output.
For a very secure connection, especially on thicker PCBs, you can use a pair of pliers to gently squeeze the cover shut.

What's in the Box

✓1 x Solderless 4-Pin 10mm Strip to Wire Connector (with or without 1.64ft extension wire, based on your selection)

RGB Strip Light Connector with 1.64ft Extension Wire for 5050 10mm LED strips , 20AWG 4-PIN + 4-PIN connector, DIY Strip to Controller or Board to Board Jumper, Waterproof Optional