Are these compatible with RGB or RGBW LED strips?

No, these are 2 pin led strip light connector caps designed specifically for single color LED strips. They do not have enough openings for the multiple pins on RGB/W strips.

What material are these caps made of?

They are made from high-grade, flexible silicone, which is durable and provides excellent protection against moisture and dust when sealed correctly.

Spec Sheet - SC-ACCESSORIE-023

Select PCB Width:	8mm (0.31in) (Base), 10mm (0.39in) (Base), 15mm (0.59in), 20mm (0.79in), 30mm (1.18in), 16mm (0.63in), 12mm (0.47in), 28mm (1.1in)
Select Quantity:	4 PCS/Pack (Base)
Type of End Caps:	With Hole (Base), No Hole (Base), Half With Hole + Half No Hole (Base)
Availability	In Stock
Condition	Brand New

Maintain the integrity and longevity of your custom lighting installations with our Silicone End Caps, specifically designed for waterproof single-color LED strips. When you cut a waterproof strip, the end is exposed and vulnerable to moisture and dust, compromising its IP rating. These high-quality silicone caps provide a simple, effective solution to reseal those ends, ensuring a durable, professional finish.

Available in a comprehensive range of eight PCB widths from a slim 8mm to a wide 30mm, these caps fit most standard single color strips. We offer three convenient kit options: four caps with pre-made holes for wiring, four solid caps for sealing terminal ends, or a mixed pack of two of each. This flexibility allows you to perfectly terminate a strip run or prepare it for a secure connection to a power supply, restoring its protective qualities for reliable performance in any environment, from outdoor patios to kitchen backsplashes.

Key Features

Wide PCB Compatibility

Designed to fit a broad range of single color LED strips with 8 available PCB width options from 8mm to 30mm.

Durable Silicone Material

Made from flexible, high-grade silicone that creates a tight, water-resistant seal to protect strip connections from moisture and dust.

Professional Finish

Provides a clean, finished look to custom-cut LED strip ends, essential for high-end residential and commercial installations.

Maintains IP Rating

When used with silicone glue (not included), these caps help restore the waterproof rating of your LED strips after cutting.

Product Specifications

Parameter	Details
Product Name	Silicone End Caps for Waterproof Single Color LED Strips
Model Number	SC-ACCESSORIE-023
Quantity per Pack	4 Pieces
Material	Silicone
Compatible Strip Type	Waterproof Single Color LED Strip Lights (2-Pin)
Available PCB Widths	8mm, 10mm, 12mm, 15mm, 16mm, 20mm, 28mm, 30mm
Configuration Options	With Hole (4pcs), No Hole (4pcs), Half With Hole + Half No Hole (2+2pcs)

Application Scenarios

Outdoor and Landscape Lighting Perfect for sealing cut ends of LED strips used in garden paths, deck rails, or architectural highlighting. These caps protect the circuitry from rain, sprinklers, and humidity, ensuring your outdoor lighting remains vibrant and functional.

Bathroom and Kitchen Installations In moisture-prone areas like kitchens, bathrooms, or under cabinets, cutting waterproof strips is often necessary. Use these caps to reseal the ends, preventing steam and splashes from causing shorts or corrosion.

Custom DIY LED Projects For any project that requires cutting waterproof LED tape to a specific length, these end caps are essential. They provide a secure, professional termination whether you're building custom signage, accent lighting for aquariums, or integrated furniture lighting.

How to Use These End Caps

Carefully cut your waterproof LED strip along the designated cutting line.
Select the appropriate end cap for your needs. Use a cap 'With Hole' if you need to run wires out for a connection. Use a cap with 'No Hole' to seal the final end of a strip.
Apply a small bead of RTV silicone sealant or another suitable waterproof adhesive (not included) just inside the opening of the silicone cap.
Firmly slide the cap over the cut end of the LED strip, ensuring it is seated fully.
Wipe away any excess sealant. Allow the adhesive to cure completely according to the manufacturer's instructions before exposing it to moisture. This creates a durable, waterproof seal.

⚠ Precautions

Ensure you select the cap size that matches the PCB width of your LED strip for a proper fit.
These caps with hole are designed for 2-pin single color strips and will not work with multi-pin RGB or RGBCCT strips.
A waterproof adhesive is required to achieve a fully waterproof seal and is not included in the pack.

What's in the Box

✓4 x Silicone End Caps (Configuration as per your selection)

Frequently Asked Questions

Q: What is the difference between the 'With Hole' and 'No Hole' caps?

A:The 'With Hole' caps have a small opening to pass wires through, allowing you to connect the strip to a power supply or another strip. The 'No Hole' caps are solid and used to completely seal the end of a strip run.

Q: Do I need to use glue with these end caps?

A:Yes, to achieve a proper waterproof seal, you must use a silicone adhesive or RTV sealant. The glue is not included with this product.

Q: How do I choose the correct size for my LED strip?

A:Measure the width of the circuit board (PCB) of your LED strip, not the entire silicone casing. Select the end cap size that matches your PCB width (e.g., a 10mm PCB width requires a 10mm end cap).

Q: Can I use these on non-waterproof LED strips?

A:While they are designed for waterproof strips, you can use them on non-waterproof strips for a clean, protective, and finished look, though sealing would not be necessary.

5050 LED Strip Gapless Connector 10mm 2 pin for Single Color LED Strip Lights, LED Tape Connector Board To Board, Strip to Strip Joint, 4 pack