Go to Top
SuperLightingLED
SUPERLIGHTINGLED CO., LTD
Web: www.superlightingled.com
Email: [email protected]
Date: 2026-11-03 | ID: 2750

2 Pin Grey Connector Wire Cable for Male Female LED Strip Light

MODEL: SC-ACCESSORIES-028
Price based on selections below:
$1.29
AvailabilityIn Stock
ConditionBrand New
Technical Specifications

Create clean, reliable, and disconnectable connections for your lighting projects with our 2 Pin Male/Female Connector Wire Cable. This essential accessory is specifically designed for single color LED strip lights, providing a secure and straightforward way to bridge gaps, create extensions, or connect your strips to a power source. Unlike complex solderless clips, this pre-wired pigtail set offers the durability of a soldered connection with the convenience of a plug. The 150mm leads use flexible 22AWG tinned copper wire, ensuring excellent conductivity and long-term performance for your custom lighting installations.

Key Features

Secure Plug-and-Play Connection

Features a matching male and female plug set that creates a firm, reliable link that can be easily connected and disconnected as needed.

High-Conductivity Tinned Copper

Utilizes 22AWG oxygen-free tinned copper wire for low resistance, stable power delivery, and excellent corrosion resistance.

Pre-Wired for Convenience

Each connector comes with a 150mm (approx. 6-inch) wire lead, saving you time on stripping and preparing wires for your project.

Durable PVC Insulation

The flexible grey PVC jacket protects the internal wires from abrasion and makes routing the cable simple and discreet.

Technical Highlights

  • Tinned copper conductors for superior conductivity and corrosion resistance.
  • Secure-locking male and female plug design prevents accidental disconnection.
  • Flexible 22AWG wire is ideal for navigating corners and tight spaces.
  • Specifically designed for 2-conductor single color LED strip applications.
2 Pin Grey Connector Wire Cable for Male Female LED Strip Light - photo 1
The 2-pin male and female connector set with 150mm grey wire leads.

Product Specifications

ParameterDetails
Product ModelSC-ACCESSORIES-028
Connector Type2-Pin Male and Female Pair
Pin Count2
Wire Gauge22AWG
Wire Length (per side)150mm / 15cm (approx. 5.9 inches)
Conductor MaterialTinned Copper
Insulation MaterialPVC
Jacket ColorGrey
ApplicationSingle Color LED Strip Lights

Application Scenarios

Custom LED Strip Extensions Perfect for bridging gaps in your LED strip runs, such as going around cabinet frames, door arches, or other obstacles without having a lit section.
Modular and Portable Lighting Create modular lighting setups for trade show booths, display cases, or event lighting that can be quickly assembled and disassembled using the convenient plugs.
Power Supply Pigtails Use as a reliable pigtail to connect the end of a single color LED strip light run to a low-voltage DC LED power supply or a single color dimmer.

How to Use This Connector

  1. Ensure your LED strip and power source are disconnected from electricity before starting.
  2. Identify the positive (+) and negative (-) markings on your single color LED strip's solder pads.
  3. Strip a small amount of insulation from the bare wire ends of both the male and female connectors.
  4. Solder the corresponding wires to the LED strip's contact points, ensuring correct polarity (+ to +, - to -). It is common to use the red-marked wire for positive and the other wire for negative.
  5. Use heat-shrink tubing over the solder joints for a clean and insulated connection.
  6. Connect the male and female plugs together, ensuring a snug fit.
  7. Reconnect your power source and test the lighting installation.
⚠ Precautions
  • Always verify polarity before soldering and applying power. Reversing polarity can damage your LED strips.
  • This is a non-waterproof connector intended for indoor or dry-location use only.
  • Ensure your total power draw does not exceed the maximum current capacity of 22AWG wire to prevent overheating.

What's in the Box

  • ✓1 x 2 Pin Male/Female Connector Wire Cable Set (150mm)

Frequently Asked Questions

Q: What kind of LED strips can I use this connector with?

A:This 2 pin led strip light connector is designed exclusively for single color LED strip lights that have two contact points (+ and -).

Q: Is this a solderless connector?

A:No, this is a pre-wired pigtail connector. The bare wire ends must be connected to your LED strip, typically by soldering for the most secure connection.

Q: Can I use this for RGB or RGBW LED strips?

A:No. RGB strips require 4-pin connectors, and RGBW LED strip lights require 5-pin connectors to control all color channels. This is only for 2-pin applications.

Q: What does 22AWG mean?

A:AWG stands for American Wire Gauge, which measures the wire's thickness. 22AWG is a standard size suitable for most low-to-medium power single color LED strip applications over short distances.

Q: Can I cut the wires to make them shorter?

A:Yes, you can easily cut the wires to a custom length and strip the ends to fit your project's specific needs.

Q: Is this connector waterproof?

A:No, this connector is not waterproof and should only be used in dry, indoor locations. For outdoor or wet applications, you would need IP67 or IP68 rated connectors.

© 2026 SuperLightingLED. All specifications are subject to change without notice.