Spec Sheet - LEDNEON-ACCOR-011

Availability	In Stock
Condition	Brand New

Streamline your lighting projects with the DC12/24V Single Color LED Neon Flex Connector. This 25cm pigtail is the perfect solution for creating a fast, reliable, and solder-free power connection for your custom-cut lengths of low-voltage LED neon flex. Featuring a standard DC female barrel jack on one end and a sharp, piercing 2-pin quick connector on the other, this accessory eliminates the need for complex wiring. It's an essential tool for both DIY enthusiasts and professional installers looking to quickly connect single color LED strip lights or neon ropes to a compatible power source, ensuring a clean and secure setup every time.

Key Features

Solderless Quick Connection

Features a 2-pin copper connector that pierces the LED strip's PCB for a secure, tool-free electrical connection.

Universal DC Power Input

Equipped with a standard 5.5mm x 2.1mm DC female barrel jack, compatible with most common low-voltage power adapters.

Dual Voltage Compatibility

Designed to work seamlessly with both DC12V and DC24V single-color LED lighting systems.

Plug-and-Play Installation

Simplifies the process of powering cut sections of LED neon, making it ideal for custom lengths and rapid installations.

Flexible Pigtail Length

The 25cm (9.84-inch) cable provides ample length to easily maneuver and connect your light strip to the power source.

Product Specifications

Parameter	Details
Model	LEDNEON-ACCOR-011
Product Type	Power Pigtail Connector
Voltage	DC 12V / 24V
Connector A	DC Female Barrel Jack (5.5mm x 2.1mm)
Connector B	2-Pin Quick Copper Pin Connector
Total Length	25cm (approx. 9.84 inches)
Pin Count	2
Compatibility	Single Color (2-conductor) LED Neon Flex, Single Color LED Tape Lights
Materials	PVC, Copper

Application Scenarios

Custom LED Neon Signage Perfect for creating custom LED neon flex signs. This connector allows you to easily power individual letters or design elements that have been cut from a longer reel, providing a clean and simple power entry point.

Architectural and Cove Lighting When installing single color LED neon flex in coves, under cabinets, or as accent lighting, this connector provides a quick way to link cut segments back to the main power line without the hassle of soldering in tight spaces.

DIY and Prototyping Projects An essential component for makers and lighting professionals. Quickly test and power custom LED fixtures or prototype lighting designs on the fly with this reliable plug-and-play led connector 2 pin solution.

How to Use This Solderless Neon Flex Connector

Ensure your power supply is disconnected before starting.
Make a clean, straight cut on your single color LED neon flex at a designated cut mark.
Carefully align the two prongs of the quick copper pin connector with the two corresponding copper solder pads on the LED strip inside the neon flex.
Firmly press the connector onto the end of the neon flex. The sharp pins will pierce the flexible PCB to make a solid electrical contact.
Connect the DC female jack to the male barrel plug from your DC12V power supply or DC24V power supply.
Reconnect power to test the connection. If the strip does not light up, disconnect power and check the polarity and pin alignment.

⚠ Precautions

This is a led connector 2 pin designed exclusively for single color (2-conductor) LED strips. It is NOT compatible with 3-pin CCT, 4-pin RGB, or other multi-channel strips.
Always verify that the voltage of your power supply (12V or 24V) matches the required voltage of your LED neon flex.
This connector is not waterproof and should only be used in dry, indoor locations. For outdoor applications, use appropriate IP-rated connectors and sealing methods.
Ensure a secure connection. A loose connection can cause flickering or failure to light.

What's in the Box

✓1 x DC12/24V Female to 2-Pin Quick Connector for Single Color LED Neon Flex (25cm)

Frequently Asked Questions

Q: Can I use this connector for RGB or RGBW LED neon flex?

A:No, this is a 2-pin connector designed specifically for single color LED strips. For RGB or RGBW strips, you will need a connector with 4 or 5 pins, respectively.

Q: Is this connector waterproof?

A:This connector is not waterproof and is intended for use in dry, indoor environments only. For outdoor or wet applications, you must use IP67 or IP68 rated connectors and sealants.

Q: Do I need any special tools to install this?

A:No tools are required. The connector is designed for a simple, solderless press-fit installation. Just ensure your neon flex is cut cleanly.

Q: What is the size of the DC female barrel jack?

A:It is a standard 5.5mm x 2.1mm DC barrel jack, which is compatible with the majority of low-voltage LED power adapters.

Q: Will this work with standard LED tape lights as well as neon flex?

A:Yes, while designed for LED neon flex, this connector can also be used with standard 2-pin single color LED strip lights, provided the pin spacing aligns with the solder pads.

Q: How is this different from a high-voltage AC connector?

A:This connector is for low-voltage DC 12V/24V systems. High-voltage connectors are designed for AC 110V/220V strips and are much larger and not interchangeable. Using the wrong type is extremely dangerous.

DC12/24V Single Color LED Tape lights LED Neon FLex lights DC Female Connector to Quick Copper Pin Connector, 25cm Long