Do I need to solder with this 4 pin led strip connector?

No, this is a completely solderless led strip connector. It uses a piercing clamp mechanism to create a secure connection.

Will this work with my waterproof (IP65) LED strip?

Yes, it is designed for both non-waterproof (IP20) and silicone-coated waterproof (IP65) strips. You do not need to remove the silicone coating.

Can I use this for addressable strips like WS2815 or WS2813?

Absolutely. This connector's key feature is its compatibility with 4-pin 10mm addressable LED strips, including dual-signal types like WS2813 and WS2815, in addition to standard RGB strips.

Is this connector for joining two strips or for connecting a strip to wires?

This is a strip-to-strip (or PCB-to-PCB) connector, designed to create a continuous, seamless run from two separate strip segments.

Spec Sheet - RGB-ACCESSORIE-014

Select Applied to:	Non-waterproof IP20 (Base), Waterproof IP65 (Base)
Select PCB Width:	10mm (0.39in) (Base)
Availability	In Stock
Condition	Brand New

Effortlessly join two segments of LED strip lighting with the Solderless Hippopotamus Connector. This innovative 4 pin led light strip connector is engineered for 10mm wide PCBs, creating a secure and reliable strip-to-strip connection without any soldering. Its unique strength lies in its broad compatibility. Unlike standard connectors, the Hippo-Clip is perfect not only for conventional 5050 RGB strips but also for advanced dual-signal addressable LED strips like WS2813, WS2815, and WS2818. The robust clamping mechanism provides a solid, durable link, saving you significant time and effort on custom lighting projects, repairs, and installations. It's the ideal solderless solution for both simple color-changing setups and complex, individually addressable lighting designs.

Key Features

Universal 4-Pin Compatibility

Works seamlessly with standard 5050 RGB strips and advanced addressable LED strips, including WS2813, WS2815, and WS2818 models.

Solderless Hippo-Clip Design

Features sharp, piercing pins that create a strong mechanical and electrical bond for a connection far more reliable than traditional pressure-fit connectors.

Waterproof Strip Ready

Connects directly to both non-waterproof (IP20) and silicone-coated waterproof (IP65) strips without the need to peel back the protective layer.

Fast Strip-to-Strip Connection

Designed specifically to join two 10mm 4-pin LED strip segments end-to-end, perfect for extending runs or utilizing leftover pieces.

Durable & Safe Construction

Made from flame-retardant material to ensure a safe and long-lasting connection in your lighting projects.

Product Specifications

Parameter	Details
Model	RGB-ACCESSORIE-014
Product Type	Solderless Strip-to-Strip Connector
Pin Configuration	4-Pin
Compatible PCB Width	10mm (0.39in)
Compatible IP Ratings	IP20 (Non-waterproof), IP65 (Silicone Coated)
Compatible RGB Strips	SMD 5050 RGB
Compatible Addressable Strips	WS2813, WS2815, WS2818, SK9822, APA107, Single-Signal DMX, etc.
Material	Flame Retardant Plastic, Copper Pins

Application Scenarios

Custom-Length LED Installations Perfect for creating long, seamless runs of cove or under-cabinet lighting. Easily connect leftover strip sections to minimize waste and achieve the exact length required for your project without soldering.

Addressable LED Project Prototyping An essential tool for makers and DIY enthusiasts working with addressable lighting. Quickly connect and test segments of WS2815 IC Programmable LED Strips or other pixel tapes to finalize your design before permanent installation.

On-Site LED Strip Repair Efficiently repair a damaged section of an installed 4-pin LED strip. Simply cut out the faulty part and use this connector to bridge the gap, restoring your lighting in minutes with a durable, reliable fix.

How to Use This Connector

Open the transparent cover of the connector.
Verify your LED light strip is 10mm wide and has 4 clean copper contact pads.
Slide the end of the LED strip into the connector. Ensure the strip is pushed all the way in until it hits the backstop, with the copper pads positioned directly above the internal metal pins.
Firmly snap the transparent cover closed. You may use pliers for extra leverage to ensure it is fully seated and locked on both sides. The pins will pierce the strip, creating a secure connection.

⚠ Precautions

Ensure the polarity markings on both LED strips align (+ to +, G to G, etc.) before connecting.
This connector is designed for strip-to-strip (PCB-to-PCB) connections only.
Confirm the cover is fully and evenly clamped down to guarantee a stable electrical connection.
For IP65 strips, the connector pierces the silicone; no removal is necessary. For full water resistance, you can apply silicone sealant around the connector after installation.

What's in the Box

✓1x 4-Pin Solderless Hippopotamus Connector for 10mm LED Strips

Frequently Asked Questions

Q: What is a 'Hippopotamus' or 'Hippo-Clip' connector?

A:It refers to the strong, clamping design. The sharp pins act like teeth that bite through the strip's flexible PCB to create a very secure mechanical and electrical connection.

Q: How can I ensure the best possible connection?

A:Make sure the strip's copper pads are clean and perfectly aligned over the connector's pins. Then, press the cover down firmly and evenly until it clicks shut on both sides.

RGB LED Strip Connector 4 pin Solderless Hippopotamus Connector, PCB to PCB, Applicable to 5050 10mm RGB or WS2813 WS2815 WS2818 LED Strip Lights